This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Messages - taysidedragon
Pages: 1 ... 82 83 [84] 85 86 ... 88
1246
« on: January 14, 2018, 02:46:15 PM »
Be careful when putting grippers on fences and gates etc. If Johnny their cuts his hands on them whilst trying to burgle you and can actually sue you for his injuries! If you place a notice on the public side warning of the danger they have no redress. This is why you no longer see barb wire on fencing. Any deterrent must be visible or notified (electric fences one example). The country has gone mad and favours the criminal rather then the potential victim, it's the PC brigade again! A mate of mine spreads filthy old tractor grease over the top of his fence, once you get that all over your hands and clothes you'd want to get away sharpish as you've left your fingerprints in the grease, perfect for the police 👌. Good news you are back in operation though Roy.
I don't care if little Johnny low life get's hurt, i can live with that, and if he breaks in while i am there, well use your imagination, this country may have gone mad , but i can get madder.
Well said! 😈
1247
« on: January 13, 2018, 03:41:27 PM »
Great news. Rock on. 🔧
1248
« on: January 12, 2018, 11:25:13 AM »
Looking good. There might be a problem with that camshaft though!
1249
« on: January 11, 2018, 01:23:47 PM »
If you feel sure the spare moped is not nicked I don't see a problem. Have it for the spare parts. If you're not sure about scrapping it, give the local scrap yard a ring. He'll tell you if he's able to take it without v5. Hth.
1250
« on: January 04, 2018, 11:56:09 AM »
Ho ho ho!
1251
« on: January 01, 2018, 02:58:58 PM »
Very bad news. Things can only get better. Don't let it get you down too much.
1252
« on: December 27, 2017, 11:24:59 PM »
4 to say this forum has lost it's spark. 😉
1253
« on: December 27, 2017, 11:13:10 PM »
1254
« on: December 21, 2017, 02:18:47 PM »
They look pretty close to what I had in mind. Might need to modify the end fitting profile slightly. Cheers. ☺
1255
« on: December 20, 2017, 11:50:50 PM »
The standard 400/4 footpegs are a bit on the chunky size for my cafe style rebuild. Can anybody recommend an alternative footpeg that will fit the original Honda mountings? I'm looking for a modern style aluminium peg without going for rearsets. (Too old and creaky for that!)
1256
« on: December 18, 2017, 12:24:18 PM »
1257
« on: December 16, 2017, 04:49:57 PM »
I suppose it's a lesson to all of us. Never assume that the old parts were fitted correctly in the first place! Even factory original parts can be fitted wrongly.
Yep, bloody previous owners, they have a lot to answer for at times !!! And I thought I was doing so well. Never mind. I wonder if that's why the forks got stuck down sometimes ?
It may be. The stantions are straight aren't they? Your rebuild is going really well. The fork seals are just a little hiccup. Everybody has them so no big deal. Looking forward to the rest of the bike rebuild.
1258
« on: December 16, 2017, 04:29:44 PM »
I suppose it's a lesson to all of us. Never assume that the old parts were fitted correctly in the first place! Even factory original parts can be fitted wrongly.
1259
« on: December 16, 2017, 03:30:38 PM »
The bike looks amazing. I would be really worried about my crown jewels though.
1260
« on: December 08, 2017, 11:19:09 PM »
I use a old Miller 300amp, 3 phase.
Cheers. ☺
Pages: 1 ... 82 83 [84] 85 86 ... 88
|