Recent Posts

Pages: [1] 2 3 ... 10
1
Misc / Open / Re: Resizing picture facility
« Last post by Orcade-Ian on Today at 07:37:15 PM »
Hi Steve,
Yes 5Mb would be enough - until Apple beggar about with the next iphone.  Do you have any idea why the resize facility disappeared?


Ian
2
Out & About / Re: OUT AND ABOUT 2024
« Last post by K2-K6 on Today at 07:32:58 PM »
Another Day another Beach... getting lucky with weather again

(Attachment Link)

Looks a nice day out, is that Perranporth you're at ?
3
CB500/550 / Re: Swinging arm bushes
« Last post by SteveW on Today at 06:59:13 PM »
Yes you do Steve. They are dust seals and they also have a rubber seal on the inside to keep the swing arm grease in.

Thanks Dave.
4
CB500/550 / Re: Swinging arm bushes
« Last post by Seabeowner on Today at 06:55:45 PM »
Usually you find the collar more worn than the bushes, the early one is still available, but bloody expensive, the later one is not available but you can use the early one, preferably with the bolt having a grease nipple at each end rather than the one in middle of swing arm

That's been my experience as well. Managed to find a couple of the precision steel rods when they were cheaper.
5
Out & About / Re: OUT AND ABOUT 2024
« Last post by Nurse Julie on Today at 06:48:45 PM »
Lovely day out for a bimble around the Wolds.

[ Guests cannot view attachments ]
6
Misc / Open / Resizing picture facility
« Last post by SteveD CB500K0 on Today at 06:47:40 PM »
I could increase the maximum size allowed. We have never busted the storage limit so I’m willing to risk it.

What size should I use?

RAW images from my son’s wedding in December ran to about 18Mb each (there were 600 of them).

I could raise it to 5Mb. Would that be enough?


Sent from my iPhone using Tapatalk
7
Misc / Open / Re: Resizing picture facility
« Last post by Orcade-Ian on Today at 06:46:43 PM »
Thanks Johnny,
I'll give it a try - I was just out on the 550 today and wanted to post a bit about the trip.

Ian
8
Misc / Open / Re: Resizing picture facility
« Last post by Johnny4428 on Today at 06:35:25 PM »
Ian, I had exactly the same problem, I posted on here maybe about 3 to 4 weeks ago. The easiest way I found round it was to screen shot the pics and post the screen shot, there was quite a few suggestions on here to get round it too. Annoying!😡
9
CB500/550 / Re: 1975 CB500K1 crank rotation resistance
« Last post by McCabe-Thiele (Ted) on Today at 06:20:05 PM »
A bit of a head scratcher - not trying do doubt your ability - are you sure when you fitted  the main shells in the correct  main bearing positions as number 1 main is then on your right when inverted.

Even so a tight clearance shell should not make it so resistant to rotation.
10
Misc / Open / Resizing picture facility
« Last post by Orcade-Ian on Today at 05:58:47 PM »
Hi folks,
I've been using the picture resizing facility when posting but it seems to have disappeared now.  I usually take pics with iphone or ipad which are often over the 3Mb limit and in the past you were able to choose a smaller size after you had selected the desired image.  Is there an easy way around this?

Ian
Pages: [1] 2 3 ... 10
SimplePortal 2.3.5 © 2008-2012, SimplePortal