Honda-SOHC
SOHC.co.uk Forums => CB350/400 => Topic started by: cliff7 on January 13, 2020, 02:14:27 PM
-
Any recommendations for rebuild kits. Apart from DS, 4into1 have some advertised as made in Taiwan. Also some direct from Taiwan, cheaper but with some negative feedback. Tried to search what most people use but I am not very good at that sort of thing.
-
Just get the O ring kits from Gerben and re use all the brass as the original brass is better than pattern
-
Just get the O ring kits from Gerben and re use all the brass as the original brass is better than pattern
Agree Bryan, that really is the best way. Contact Gerben on gerbenhilly@hotmail.com
-
Thanks again. Really finding this forum helpful.