Honda-SOHC
SOHC.co.uk Forums => CB350/400 => Topic started by: Dolomite_ on January 05, 2020, 04:35:37 PM
-
I've referenced some pictures and It appears that I have the retaining spring next to the rear brake lever in the right place but there still seems to be quite a bit of play in the brake lever. The adjuster nut on the wheel end is compressing the spring that end quite a lot and if I keep turning the nut to take out the play it will be fully compressed.
Could anyone upload some pictures of the 2 springs so I can compare?
-
Are you sure the brake lever arm is in the correct position on the splines into the drum.
-
Also to add to the above, have you got the rear brake adjuster rod in the correct position at the angle part at the front? I will take a photo in a minute.
-
That's a piece or rubber on the end of the spring, so me frame doesn't get scratched 😊😊😊
[attachimg=1]
-
Thanks all. Got that job ticked off, now onto the next one.