This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Messages - Piki
Pages: 1 ... 3 4 [5] 6 7 ... 24
61
« on: August 27, 2019, 11:14:45 AM »
I have just done mine it was a new seat without the Honda logo I bought a stencil of Ebay and a tin of vinyl spray what do you think !
Hi There, do you remember the Seller name?
62
« on: July 22, 2019, 05:26:55 PM »
Can't joke about such things. It upsets the Indians.
There are about all “religions”of world, with respect but is only a joke. Anyway my apologies to all the Indians people's 
63
« on: July 22, 2019, 12:46:02 PM »
64
« on: July 22, 2019, 11:39:19 AM »
65
« on: July 16, 2019, 07:48:30 PM »
Hello, Thank you Julie, Thank you pistonbroke66, your decal are on the Road.
Best Regards.
66
« on: June 21, 2019, 07:16:39 AM »
If you need the Logo, contact me!
67
« on: June 10, 2019, 07:14:52 AM »
Welcome to the forum, a lot of experts here!!! You have a TTR400 ( www.ttr400.com) located in SA, specialising in the CB400F!! Best Regards.
68
« on: May 09, 2019, 07:15:10 AM »
I have used Automec silicone fluid in all my vehicles for a number of years now.
Here's Automec's description of their product.
"Unlike standard, glycol based, clutch/brake fluid, Automec DOT 5 - silicone fluid is non - hygroscopic which means it does not absorb moisture. This will help prevent corrosion in the system and, under heavy braking conditions, it tends not to boil. Also, it won't harm paintwork if spilt.
NOTE; It is completely safe to mix Automec DOT 5 silicone clutch/brake fluid with standard, Glycol based, clutch/brake fluid. However, in order to obtain the maximum performance benefits, it is best to drain the brake system refill with Automec Dot 5 silicone fluid."
Ideally the system should be clean but if you drain out the old fluid first then bleed the silicone fluid through thoroughly you should be fine.
Fantastic!!
69
« on: May 07, 2019, 03:10:29 PM »
Thank you for the answers mates!
70
« on: May 07, 2019, 11:48:01 AM »
Hello, I would like “upgrade” my front Brake oil fluid to a “silicone fluid brake” my question is if I have to change all “tubes/pipes” of the circuit or I only need drain the “oil front brake fluid” and refill it with silicone fluid.
Thank you.
71
« on: April 28, 2019, 08:55:39 AM »
I have them on stock, if you need them, let me know!
72
« on: April 26, 2019, 10:35:22 AM »
That model came with Rear Tail Decal??
73
« on: April 13, 2019, 10:42:56 AM »
Bike is almost ready for the road, just a couple of small jobs to do and waiting on the DVLA to sort out my historic status. To be fair the pics do flatter it slightly, some of the original chrome is not great and the paint is a rattle can job by me with decals from Piki. I decided to go with decals as per the 400/4 as the previous owner had filled the original badge holes so was easier this way. The tank looks much better than it did originally with its "custom" paint job! (Attachment Link) (Attachment Link)
Great Job,Looks Fantastic!
74
« on: April 07, 2019, 12:50:14 PM »
Not Problem Mate, I would like see the decal only, anyway if you want I could send a pair free to you for "peace of mind".
75
« on: April 07, 2019, 11:49:36 AM »
Have you a pic from the decal?
Pages: 1 ... 3 4 [5] 6 7 ... 24
|
Show Posts
