Honda-SOHC
SOHC.co.uk Forums => CB350/400 => Topic started by: Athame57 on February 28, 2019, 11:49:58 PM
-
I noticed my centre stand when up is in contact with my exhaust and I'm not sure that should be the case as nowhere can I see a rubber cushion I'll swear exists to stop that ....?
-
There should be a rubber pad that fits into a hole in the silencer near the mounting plate.
They are available.
-
https://www.davidsilverspares.co.uk/parts/by-part-number/partnumber_9501161000/
Think this is it. £1.38
-
Thanks for that! ;D
-
(https://www.davidsilverspares.co.uk/graphics/parts/9501161000.jpg)
Cushion arrived in the post today and i went straight downstairs to fit it, alas no joy. I fitted the rubber T stud on the back of the cushion into the groove on the silencer that also holds the bolt that secures the silencer to a brace between it and the frame. As I really expected the stand simply kicked it straight off again. The grooves on the cushion face side on too, I doubt they are meant to do that, face on would be more like it. Is there supposed to be a seperate brack to carry this cushion that I'm missing?
-
Photos from underneath George.....including dirt (still ::)
[attachimg=1]
[attachimg=2]
-
Thanks for the images Julie that explains it, my silencer does not have the same fittings. I'm going to have to invent something.
-
Thanks for the images Julie that explains it, my silencer does not have the same fittings. I'm going to have to invent something.
That would explain it George. This is a Brituro silencer, which have the same fittings as the OEM silencer.
-
a rubber door stop maybe?
i have a motad silencer with a bracket from something else so the stand was hitting the bracket and i fitted a door stop. it may not look great but it works!