Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Topics - JohnS

Pages: [1]
1
CB350/400 / Engine/ Gear Box Oil Recommendation
« on: June 01, 2013, 03:31:58 PM »
As the day to start my rebuilt engine approaches my thoughts turn to oil!
The manual recommends SAE 10W - 40 SE for normal use.
I understand that this is an old oil designation and today's designations eg API, ACEA are not directly comparable.
I would welcome advice from those in the know.
Also should I use a special oil to run the engine in or just change it after ? 500 miles.
Many thanks.

2
CB350/400 / Spark plug lead replacement
« on: May 26, 2013, 11:59:35 AM »
Hi All,
Does anyone know if it is possible to replacement the HT leads from the coils to the spark plugs on a 400/4 or is it necessary to buy new coils?
Thanks,
John

3
CB350/400 / Routing of carb breather tubes.
« on: May 25, 2013, 07:27:42 PM »
Hi All,
Does anyone have a picture of the correct routing for the Carburetor breathing tubes for a 400 four?
Many thanks.

4
CB350/400 / Standard 3.5 mm bullet connectors
« on: May 25, 2013, 07:23:55 PM »
Hi All,
Does anyone have a UK supplier for the Honda standard 3.5 mm bullet connectors?
Many thanks.

5
CB350/400 / Oil pump
« on: July 03, 2012, 10:40:39 PM »
Hello All!
Has anyone out there dismantled a 400/4 oil pump?
Could anyone tell me whether the spindle driving the oil pump should have an o-ring or a washer in the recess in the base of the pump?
Many thanks.

Pages: [1]
SimplePortal 2.3.5 © 2008-2012, SimplePortal