Honda-SOHC
SOHC.co.uk Forums => CB500/550 => Topic started by: singleoverheadbraincell on March 08, 2013, 10:37:07 AM
-
Hi,
would be grateful if anyone can help me with this query. I have a 1977 550K3 and need a new airbox to carb rubber. On the David Silver website they are not listed for the K3 but are listed (as a set) for the 1977 F2 Super Sport. I presume they would fit my K3? In the photo (on the website) they look like the right ones. Can anyone enlighten me? I only need one by the way (#4 pot) but looks like I need to buy the set.
SOHBC
-
the K3 rubbers are different to all other 550s due to using different carbs. I dont think they are available in the uk, but I managed to get a set from the US but can't remember the details, will try to find them and post details. Regards, Mick
-
that'd be great Mick, thanks
Liam
-
I think they might fit with perswasion, I'm fairly sure that whilst different I have used 500 parts on my 550k3 and vise versa. I'd have to measure to be 100% sure what I've done /is possible. I do know the rubbers are longer on the k3 then the 500 but I think spacings and diameters are the same so stuff can be fitted by bending a few braketts as I recall.
-
I can't find any trace of where i bought them, i think it was via ebay or the US sohc site, i think he was just a man in a shed but did a good job reproducing rubber items.
-
They are Hand made by a man in the states in batches, if i can find the link i will post it, and no matter what you do the DS500 ones won't fit---believe me i tried!!
-
Ask Paul at mybluebike2004@yahoo.com he can probably help you.
Good luck.
-
Try this link
http://www.classicmotorcyclesolution.com/1_7_Products.html
-
thats the bloke who i got them from, but i see on his website he stopped producing them as the rubber was not ethenol resistant, although fuel should not come into contact to any great extent.
-
Its the carb to head insulators he has stopped, i think the airbox to carb he still does, it's worth an email to find out, and yes that is the one i was talking about
-
apologies to all contributors for not voicing my gratitude for your help before now on this issue........I did contact Paul at classicmotorcyclesolution.com and he apparently is able to help me. He has returned my email as per verbatim below which may be useful to anyone looking for airbox to carb rubber connectors (not to be confused with carb to inlet manifold)....he is going to send me the one connector that I need but postage is understandably quite expensive (from USA) so if anyone needs one, let me know and I can get it sent with mine if you like and I can post it on to you....
Hi Liam, I should be able help you out. I'm still producing the air box connectors, but the carb insulators are on hold. I usually sell the connectors for $30.00 for a set of four, plus shipping. I can sell you just one if want, but the shipping will be about the same. The last set I sent to the UK was about $18.00 for shipping. I accept paypal and if you'd like, I can send a paypal invoice. If you only want one, I can sell it for $8.50. If you do want one, please let me know the over all length of the connector. Thanks for the inquiry.
...............Paul