Honda-SOHC

SOHC.co.uk Forums => CB350/400 => Topic started by: matthewmosse on March 11, 2008, 08:37:57 PM

Title: spare top end for 400/4
Post by: matthewmosse on March 11, 2008, 08:37:57 PM

Hi, I've a cb400/4 head, had good compression when fitted and jornal bearings but 2 rocker cover screws snapped off in head due to crash damage. Still quite useable as a spare or replacement and I could do with the space, I think the rocker cover is still there too. Could be of use.

Title: Re: spare top end for 400/4
Post by: ianwrong on May 31, 2008, 06:58:14 PM

hey,you're selling yr cb400/4 head or looking for spare,if you're selling i m interested.

Title: Re: spare top end for 400/4
Post by: matthewmosse on May 31, 2008, 11:02:48 PM

Selling, its in a cuppord in a box, needs a clean I'd geuss (still 2 6mm bolts still in there snapped off.) rocker cover casting was dead but all internals were good. I'd want about

Title: Re: spare top end for 400/4
Post by: SteveD CB500K0 on June 01, 2008, 05:30:05 PM

Quote from: matthewmosse on May 31, 2008, 11:02:48 PM

Title: Re: spare top end for 400/4
Post by: matthewmosse on June 01, 2008, 08:17:14 PM

Geuss postage would be very steep too.