Honda-SOHC
Other Stuff => Misc / Open => Topic started by: royhall on October 06, 2019, 10:38:39 AM
-
Anyone know of a source for JIS screws that hasn't been mentioned already. I am looking for an M6*90mm, just one. Had a look at Ash's recommend but there is nothing that long on there. I know it shouldn't bother me but having one cap head screw in the clutch cover just bugs me. ;D
-
Still available from Honda, part number 9350006090, CMS have then listed in stock for 1 euro 50 each, so any Honda dealer should be able to get one.
-
Difficult to get hold of Roy, I bought one from my local Honda emporium in the end (different size to yours but still a size I could get hold of anywhere else).
-
Yep I noticed stock at CMS but one screw will end up costing about £18 even more probably from 1st November (sshhh the B word). May just put up with it until the next order with CMS or The Pirate. Thats unless anyone has an M6*90mm sitting in a bag that they could be relieved of.
-
Just noticed "zedparts" on eBay sell a complete range of JIS pattern screws in stainless. They also sell kits for some Honda's. https://www.ebay.co.uk/str/zedparts (https://www.ebay.co.uk/str/zedparts)
-
My stock of JIS only goes up to 80mm but, 90mm are available in the smallest pack of 10 ;)
Or as a single >> https://www.davidsilverspares.co.uk/parts/by-part-number/partnumber_93500060900A/
-
Thanks Trig. Have sorted it now with zedparts. Have also ordered a set of JIS screws for the GS1000 to get rid of the cap heads.