Honda-SOHC
General => Announcements => Topic started by: stuartni on August 28, 2014, 02:04:43 PM
-
Well as some of you may know after building my cb550 cafe racer and having trouble sourcing certain parts, i always planned to try and start my own small business on the side doing a range of parts for the our beloved cbs. Below will be a rough list of the parts i either have in stock and parts i hope to have in stock soon. If theres anything you after i can certainly check and see if its something i can supply.
Here is the rough list with what photos i have so far most items will be on ebay and hopefully soon my website
£9.99 Rev cable blanking plugs cb450 500t cb500 cb550 and cb750
£14.99 Alloy starter motor delete plugs to fit CB350 Twins (68-72) CB350G (73) CL350 (68-73) SL350 (69-70) CB360 (74) CB360G (74)
CB360T (75-76) CL360 (74-75) CB450 (68-74) CL450 (68-74) CB500T (75-76)
£129.99 cb750 k fork tubes
£29.99 cb550 fuel taps petcocks
£19.99 cb brake rods 470mm long direct replacement
£19.99 cb brake rods 490mm long designed for fitting to aftermarket rear sets etc
£2.70 cb side panel rubbers
£2.70 cb ignition switches
£3.40 EACH tappet covers to fit c50 c70 c90 cb400 cb500 cb550
£11.99 oil pressure switch to fit cb400 cb500 cb550 and cb750
I can also get a range of forsa enterprise rear shocks. According to a lot of fellas on the american forum seem to highly rate them. I have only order one set for my cb550 to test them out
(http://i899.photobucket.com/albums/ac192/stuarty7/Mobile%20Uploads/IMAG0100.jpg) (http://s899.photobucket.com/user/stuarty7/media/Mobile%20Uploads/IMAG0100.jpg.html)
excuse some of the photo the quality isn't great better photos to come
(http://i899.photobucket.com/albums/ac192/stuarty7/Mobile%20Uploads/IMAG0097.jpg) (http://s899.photobucket.com/user/stuarty7/media/Mobile%20Uploads/IMAG0097.jpg.html)(http://i899.photobucket.com/albums/ac192/stuarty7/Mobile%20Uploads/IMG_20140827_215224.jpg) (http://s899.photobucket.com/user/stuarty7/media/Mobile%20Uploads/IMG_20140827_215224.jpg.html)
(http://i899.photobucket.com/albums/ac192/stuarty7/Mobile%20Uploads/IMAG0096.jpg) (http://s899.photobucket.com/user/stuarty7/media/Mobile%20Uploads/IMAG0096.jpg.html)
(http://i899.photobucket.com/albums/ac192/stuarty7/Mobile%20Uploads/IMG_20140827_214658.jpg) (http://s899.photobucket.com/user/stuarty7/media/Mobile%20Uploads/IMG_20140827_214658.jpg.html)
This is an alloy adaptor for 70s/80s bmw r70 r80 r100s to convert the speedo drive to fit standard (same as honda clocks) speedos
(http://i899.photobucket.com/albums/ac192/stuarty7/Mobile%20Uploads/IMG_20140825_221549.jpg) (http://s899.photobucket.com/user/stuarty7/media/Mobile%20Uploads/IMG_20140825_221549.jpg.html)
-
As said i will do my best to add addition better photos of all the items to be available including a full range of main jets, led indicator relays, horns, handlebars, levers,piston kits cables.
Please feel free to contact me with questions and prices i will do my best to add as many pictures and details to any item i will be selling.
-
Good luck to you with your new venture 8), hope it takes off i'll keep checking in see if there's anything I need :) cheers Mick.
-
Good luck
I have chrome Forsa shocks on my 750 they've been on there for about 2-3 years now only polished them twice as I don't like cleaning and there looking as good as new but more importantly there so much better than the originals.They are rather stiff so I recommend leaving them on the softest setting.
I could do with enough side panel grommets for two bikes.
Are the 750 fork tubes just for the later K's?
Mick
-
What is the price of a brake rod for stock bikes? might be after a spare for my cb500 as mine snapped and i have yet to check the spares stock.
-
Good luck with the new venture, lets us know the name of the web site when its up and running
Alan
-
Like all said will watch and see
Cheers
Bitsa
-
Good luck
I have chrome Forsa shocks on my 750 they've been on there for about 2-3 years now only polished them twice as I don't like cleaning and there looking as good as new but more importantly there so much better than the originals.They are rather stiff so I recommend leaving them on the softest setting.
I could do with enough side panel grommets for two bikes.
Are the 750 fork tubes just for the later K's?
Mick
I Will double check with my supplier in the morning and get back to you
-
Green1 how many of each grommet type would you like and I installed my forsa shocks tonight so hopefully get to test them out over the weekend a lot of people have said good things about them.
Thanks everyone for the great comments I hope it goes well and I can keep expanding the stock range.
-
You are listing products without any prices >:(
-
You are listing products without any prices >:(
Yes sorry i did do this intentionally incase it looked as if i trying to have a for sale thread in the Announcements section of the site however i shall add prices and should there be an issue i will address it.
-
I have no problem with you selling via the site Stuart, .net do it all the time (eg Hondaman)
I'll PM you the "terms" and we should think about where such a section should go.
Steve
-
I have no problem with you selling via the site Stuart, .net do it all the time (eg Hondaman)
I'll PM you the "terms" and we should think about where such a section should go.
Steve
That would be great thanks
-
Hi, just joined the forum as now the owner of a CB750 K7 & picked up on this thread......will need parts but are you still selling them? here? via a website (couldn't find it)?
thanks