Honda-SOHC
SOHC.co.uk Forums => CB500/550 => Topic started by: paulbaker1954 on February 19, 2021, 08:07:30 AM
-
Anyone know what the female thread size is where the caliper steel pipe joins bottom hose.
Looking to make up some braided hose and need tight end fitting
(Part 4 in picture)
-
Paul
attached mine, original - M10x1.25
[attach=1]
-
Played this game a lot, several of the braided end fittings even with correct thread will not seal to the metal pipe as you need the nut on the metal pipe needs the first two thread removed to allow it to screw in far enough the seal the flare