Honda-SOHC

SOHC.co.uk Forums => CB500/550 => Topic started by: paul G on June 06, 2014, 07:43:50 AM

Title: Hammerite Replacement
Post by: paul G on June 06, 2014, 07:43:50 AM

Hi Everyone,
                        A while ago we were in a discussion about how Hammerite was crap now.
well if anyone is interested try Simonize tough black, it comes in gloss or satin black.
Straight on to metal two coats and I have achieved a superb finish.
Highly recommended. ;D ;D

Regards,

Title: Re: Mammerite Replacement
Post by: deltarider on June 06, 2014, 11:21:45 AM

Show, don't tell.

Title: Re: Mammerite Replacement
Post by: paul G on June 06, 2014, 12:53:41 PM

Believe ;)

Title: Re: Mammerite Replacement
Post by: Trigger on June 06, 2014, 12:56:27 PM

Paul, it even works better it you pop it in the oven at 200 for an hour. It then becomes fuel and fluid resistant.

Title: Re: Mammerite Replacement
Post by: Norniron on June 06, 2014, 09:05:54 PM

Quote from: trigger6969 on June 06, 2014, 12:56:27 PM

Paul, it even works better it you pop it in the oven at 200 for an hour. It then becomes fuel and fluid resistant.

I betcha the squaw loved u for that

Title: Re: Mammerite Replacement
Post by: Johnwebley on June 07, 2014, 12:35:52 AM

Quote from: trigger6969 on June 06, 2014, 12:56:27 PM

Paul, it even works better it you pop it in the oven at 200 for an hour. It then becomes fuel and fluid resistant.

 electric or gas ???



BTW  I sometimes use a heat gun to heat items before spraying,I think the paint fixes better !!!

Title: Re: Hammerite Replacement
Post by: Trigger on June 07, 2014, 11:06:35 AM

Electric is ok. I got one of those small bread ovens off a car boot years ago for a fiver. Great for small parts.

Title: Re: Mammerite Replacement
Post by: Johnwebley on June 07, 2014, 12:12:15 PM

Quote from: Oddjob on June 07, 2014, 02:24:03 AM

Quote from: Johnwebley on June 07, 2014, 12:35:52 AM

Quote from: trigger6969 on June 06, 2014, 12:56:27 PM

Paul, it even works better it you pop it in the oven at 200 for an hour. It then becomes fuel and fluid resistant.

in the past I have dunked the cans in a bucket of boiling water,works quite well !!


 electric or gas ???



BTW  I sometimes use a heat gun to heat items before spraying,I think the paint fixes better !!!

Fahrenheit you nutter  :) :) :) :)