This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Messages - BigAl (Alan)
16
« on: September 22, 2023, 10:50:23 PM »
You’re correct about the K3 Ken. I will come back tomorrow afternoon with more information. All my records from past sales are in the workshop
17
« on: September 22, 2023, 09:30:12 PM »
Could be an F3 Ken, go on my eBay site alans-electrics…images of the loom straightened out
18
« on: March 14, 2023, 02:33:13 PM »
Do you mean these? https://www.vehiclewiringproducts.co.uk/c-56-multipin-connectors/c-155-6-3mm-blade-multi-connectors/p-429-female-blade-with-latch
The strange thing is they show a 2-way connector, but then give the dimensions for an 8-way one, and there is no choice of 2-, 4-, 6-, or 8-way blocks.
Your link shows the 6.3mm metal terminals only which do fit most 2,3,4,6,8 way plastic shells. As before, vehicle wiring products do not stock the OE Japanese plastic shells.
19
« on: March 14, 2023, 01:31:09 PM »
Bought a number of items from vehicle wiring products, but have never stocked the Japanese classic OE 6.3mm latched connectors
20
« on: January 12, 2023, 02:25:18 PM »
The only suppliers are in in USA..silver/grey gloss pvc cable sleeve (6,8,11mm dia). Not found anyone in the UK/Euro that stocks it ? I do have some black gloss sleeve manufactured for me within the UK (20mm dia), but the minimum order is a 1,000 metres. Tried many other supplies UK/Euro...it's either heat-shrink or pvc matt finish or thick tube.
21
« on: December 07, 2022, 12:37:40 PM »
The safety starter wiring is also missing from the CB550 sub-loom (Yellow/red & L.Green.red)
22
« on: July 25, 2022, 06:05:39 PM »
No problem, I don't normally keep the CB550F1/2 loom on the shelf, so it would be a week from order when the new harness is dispatched
23
« on: July 25, 2022, 09:16:26 AM »
Far too many insulation colour changes in the DSS loom Red/white should be Green...frame earth Green/blue---:---Brown/blue Blue/white---:---Brown/white & many other wire colours/connectors are in the wrong position? Image attached of the OE rear loom lighting connections...as most classic Honda's
24
« on: July 24, 2022, 07:36:30 PM »
Head light shell wiring would be good. Image attached of the old CB550F1/2 loom head light shell wiring connections.
25
« on: July 24, 2022, 05:59:39 PM »
Do you have images of the DSS CB550F1/2 wire harness? Old original wire harness attached...insulation colour reference
26
« on: June 10, 2022, 06:40:30 PM »
Not sure?, after a few days the insulators cleared up (not totally clear)...but I did use a long cycle on the dishwasher
27
« on: June 09, 2022, 10:57:47 AM »
Last time I cleaned an original loom (CB500K0) in my dishwasher, the connector covers became very opaque (as image)...water temperature or dishwasher tablet could be the problem?
28
« on: June 03, 2022, 03:54:11 PM »
There you go Steve, hope the image helps. Samples, my work 'bootlace' and 2.00 brown thin-wall insulated cable with uninsulated crimps attached
29
« on: June 02, 2022, 11:27:45 AM »
Simon, The bootlace crimp tool (black Handles) are normally used for stator work (as image, Kawasaki S2 new sub-loom) Handy to keep the wires in place, then apply solder to complete the connection, glass fibre sleeve fitted thereafter.
30
« on: June 01, 2022, 04:04:21 PM »
Simon, as mentioned, providing that you do some trial/error work before hand, you should be able to satisfy yourself as to what crimp tool/terminals work best for you. Cable sizes would also be a factor, Clive mentioned that doubling over 1.00mm wire within the terminals helps to provide a satisfactory crimped connection, of which I agree. I mainly use 2.00mm thin-wall insulated cable on most of my looms, it helps to minimise volt-drop and the overall thickness of the harness is no different to the OE harness. Recently replaced the OE loom on my XL500s (6 volt system) due to poor indicator & brake lighting to one of my replica looms with 2.00mm thin-wall...it made a big difference to the lighting brightness,
|