This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Messages - NICKYBOY
Pages: [1]
1
« on: June 26, 2023, 05:49:42 PM »
First try altering the needle height and the pilot air screw, worked for me.
2
« on: April 12, 2023, 08:59:15 AM »
Excellent info. Thanks for that.
3
« on: April 06, 2023, 08:29:47 AM »
Hi All.
Has anyone tried a smaller than standard, lithium type battery on their 650, if so did it charge ok with the standard charging system?
Cheers, Nick.
4
« on: December 22, 2022, 09:12:57 AM »
Yes its to match the rear, from a vfr 400. I can get a 520 rear and also a 520 front (to fit a 500/4) from davies motorsport. Do you know if a front sprocket from a 500/4 will fit a 650 ?
5
« on: December 22, 2022, 07:55:50 AM »
Hi all.
I need a 525 front sprocket for my CB650Z 1981, any ideas where i might get one. Standard is 530 !
Thanks.
6
« on: December 09, 2022, 08:44:26 AM »
Could anyone please advise where i can purchase some piston rings for my CB650z 1981 model, standard bore. Thanks.
7
« on: November 30, 2022, 07:58:10 AM »
Yes Davefirestorm. Do the slides slide and the butterfly's butterfly  . Would you want to sell them ?
8
« on: November 23, 2022, 07:09:33 AM »
I may be interested in the carbs, so long as the spacing is correct, is it a cast stub head on the intake side ?
9
« on: November 17, 2022, 06:05:54 PM »
Ah right cheers
10
« on: November 17, 2022, 04:49:11 PM »
What year/ model GPZ 600 are they from. I cant seem to find any with correct spacings !
11
« on: November 17, 2022, 02:56:55 PM »
Are the standard carbs CV carbs ?
12
« on: November 17, 2022, 02:48:28 PM »
Lovely job, mint. What carbs are they ?
13
« on: November 17, 2022, 01:31:34 PM »
They're cast stubs
14
« on: November 17, 2022, 01:04:09 PM »
Hi all.
Just bought a cb650 1981 in bits with no carbs. Seems like originals are hard to find and not the best anyway. Does anyone know what others fit. I've read that GPZ600 carbs fit, but all the ones i've looked at are spaced differently to my cb650. Ideas anyone ? Many thanks.
Modify message
Pages: [1]
|
Show Posts