Recent Posts

Pages: [1] 2 3 ... 10
1
SOHC Singles & Twins / Re: My first project - 1974 CB360 K0
« Last post by Craizeehair on Today at 05:49:44 PM »
Sorted the brakes on both wheels, stopped, cleaned, new shoes etc and put them back on the bike so it’s a bit easier to handle. I’ll give them a clean up when they come back off for new tyres further down the line. Next thing is to get the wiring harness back in the place with correct routing, it’s just draped on the bike at the moment.
2
Out & About / exploring Scotland
« Last post by Johnwebley on Today at 05:40:22 PM »


as the title says,I want to explore Scotland,

  as I live in the west mid lands,its will involve a ride  north,

 my general plan is,

 ride north,use the M6 to get past Manchester,then explore  the local areas,

I amexpecting to ride around 300 miles a day,that can be adjusted,

 so ideally a B&B  north of  Manc

I have a friend to stay with near Glasgow,
I want to explore the islands,so info on ferries  and B&B,so a nice cruise to John O'groats,

return south on the easter side,

  similar into england,down as far as Lincilnshire,then home,

 time is not critical,
 suggestions from those thatlive in the areas,

also reccomendations of places tovisit.


  some thing for 2025

  your help is appreciated
3
CB500/550 / Re: Rocker Housing - Stuck??
« Last post by Mike_Berkshire on Today at 05:28:48 PM »
The washers stick in the head recesses but if really missing are still available new.
On the adjuster is the thread stripped all the way down or just at the end? Honda should never have put that slot in there it gets abused.
New pattern ones are available but expensive and dont often come up used in good order any more.
I MAY have a used one but it wont be cheap
Thanks Bryan. The thread isnt stripped its the slot that has broken away; theres only half the slot. I have a mate who is a very ingenious fellow with a plethora of lathes, welding equipment and goodness only knows what else. I will see what he can devise but if I draw a blank I'll let you know.
4
New Member Introductions / Re: Hi Newby
« Last post by Johnwebley on Today at 05:28:12 PM »
welcome Kev

  lots of help and advice here,

 and occasional  chances to meet  up

 
5
CB500/550 / Re: Rev counter blank
« Last post by Bryanj on Today at 05:12:27 PM »
With the drive gear of course!
6
Project Board / Re: Doms CB550F1 project
« Last post by Laverdaroo on Today at 05:10:07 PM »
Have you been using their online messaging service? I've been getting some joy speaking to a chap called Jamie but as I've said before he doesn't answer some of my questions but avoids them.  I hate that, if I ask 5 questions I want 5 answers not 4!
Are you boys emailing or calling, I’ve never had an issue with them?
.


Sent from my iPhone using Tapatalk
7
CB500/550 / Re: Rev counter blank
« Last post by DomP on Today at 05:06:53 PM »
Just leave the cable off but fit the drive housing, there is an oil seal in there

Good point Bryan!
8
Project Board / Re: Doms CB550F1 project
« Last post by DomP on Today at 05:04:26 PM »
Have you been using their online messaging service? I've been getting some joy speaking to a chap called Jamie but as I've said before he doesn't answer some of my questions but avoids them.  I hate that, if I ask 5 questions I want 5 answers not 4!
9
Misc / Open / Re: Parcel Force.
« Last post by andy120t on Today at 04:38:19 PM »
RIP.🙁.


(who is Off?)
10
Misc / Open / Re: Parcel Force.
« Last post by Johnwebley on Today at 04:23:03 PM »
Totally agree

RIP off

Sent from my SM-A546E using Tapatalk

Pages: [1] 2 3 ... 10
SimplePortal 2.3.5 © 2008-2012, SimplePortal