Honda-SOHC
SOHC.co.uk Forums => CB350/400 => Topic started by: waffey on November 15, 2020, 02:24:21 PM
-
Hi all,
attempted to fit the side stand today and using my Honda parts but the bolt is way to small. I believe i ordered the correct item.
The nut I ordered from DSS seem to be the right size. Did I get it wrong?
-
Never seen a sidestand bolt with a splitpin hole
-
On the packet it says 'Bolt Stopper Arm', is that for the rear brake arm?
-
You need 90108-323-000
-
Julie, my parts list shows it as 90108-283-000. Can you check?
-
Julie, my parts list shows it as 90108-283-000. Can you check?
My error John, I put the incorrect middle part number ::) ::)
https://www.cmsnl.com/honda-cb400f2-england_model14647/screw-side-stand_90108283000/#.X7FeNVpxepg
-
Apologise, bit of a senior moment, it is the back brake bolt, after trawling through my box of bits I found the actual side stand bolt.
:-[
-
Bet it dont have a split pin hole
-
You bet right!