Honda-SOHC
SOHC.co.uk Forums => CB350/400 => Topic started by: 4wDaz on November 23, 2020, 05:18:50 PM
-
Hi does anyone have a recommendation for new pistons ? My engine needs a rebuild and a rebore, I’ve looked at Silvers website but is there anything better available ? Thanks
-
Cruzinimage do excellent piston / ring kits.
-
If you really want to push the boat out, there is a set of plus 50's on Ebay, genuine unused Honda parts, includes rings, gudgeon pins and circlips. But, you might want to take out a mortgage, £300.
-
Cruzinimage do excellent piston / ring kits.
Just had a look at there web site, have you used them before ?
-
If you really want to push the boat out, there is a set of plus 50's on Ebay, genuine unused Honda parts, includes rings, gudgeon pins and circlips. But, you might want to take out a mortgage, £300.
No thanks :D
-
Cruzinimage do excellent piston / ring kits.
Just had a look at there web site, have you used them before ?
Yes, we use their piston / ring kits regularly on CB SOHC/4. I also used them on my 400/4 engine overhaul.
-
Thanks, ill give them a go :)
-
After a long delay I'm ready to have the rebore done, the engineer has asked me to provide the standard bore size (51mm, 2.0079) and the Cruzinimage piston clearance ? I remember reading a post by Julie which said what Cruzinimage piston clearance was but I can't find it now. Thanks
-
Piston / bore clearance of 1 thou inch by n Cruzinimage pistons.
-
Thank you :)
-
Make sure he understands that is 1 thou total and not per inch and if he insists it will sieze so needs more take it elswhere
-
Ok thanks ill mention it, he comes highly recommended, he does all the rebores for a mate of mine who repairs and restores vintage bikes for a living :)