1
The Black Bomber Board / Re: 67` Bomber running problems
« on: May 20, 2024, 10:22:34 PM »
You have lost me with that one ?
tried them in DSS and all discontinued
tried them in DSS and all discontinued
Try our new info resource - "Aladdin's Cave" (Main menu)
Just added a separate link to Ash's Dropbox thread (shortcut)
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to. 1
The Black Bomber Board / Re: 67` Bomber running problems« on: May 20, 2024, 10:22:34 PM »
You have lost me with that one ?
tried them in DSS and all discontinued 2
The Black Bomber Board / Re: 67` Bomber running problems« on: May 20, 2024, 08:15:01 PM »
Well he is just a bloke on Ebay Ash so don`t know how good he is..........as he just asked to supply the dimensions so he could check to see if they is one to match it ..... so if you can just tell me if it is flat on both sides will due I think.
3
The Black Bomber Board / Re: 67` Bomber running problems« on: May 20, 2024, 08:06:46 PM »
Hi Ash
This is what he sent back so if you Know what he is on about can you have anther look at the sprocket please to give him the more info. Hi, You have not said what chain pitch you have but I assume it is 530. The 4 mounting bolt holes distance apart (known as the p.c.d.) is taken from the centres of the bolt holes. I make it 74mm centre hole as there is nothing listed with 73.7mm. The p.c.d. at 110mm with 10mm bolt holes. Is the sprocket flat on both sides or a recessed ring on the inner face? I think it might be 280 sprocket type but I now need to check to see if this is still available. 4
The Black Bomber Board / Re: 67` Bomber running problems« on: May 19, 2024, 10:27:47 PM »
are goodo then Ash I was some use ha......... pity you did Not Have two ha
![]() that would have made it all the more worth while ![]() 5
The Black Bomber Board / Re: 67` Bomber running problems« on: May 19, 2024, 07:19:03 PM »
are thanks Ash........ well its Not just the mrs then that I upset LOL
so I have sent that off to the bloke .... I hope he will find a sprocket that will fit with them Dimensions. so thanks Again Ash to the rescue ![]() ![]() 6
The Black Bomber Board / Re: 67` Bomber running problems« on: May 18, 2024, 10:35:34 PM »
well I might have to keep the set up then as a 15T and 35T ......... the running of the bike is fine now ..well near on anyway ..but the revs just seem to be so high
![]() oh the other thing is I have been on the DSS and looked at Ashley`s parts list and they did do a 17T sprocket for the Bomber so it must have been able to run with a 17T ha 7
The Black Bomber Board / Re: 67` Bomber running problems« on: May 18, 2024, 07:13:27 PM »
Hi Bryan
Well I am using the bike so don`t want to take it off the road yet if you know what I mean......... so just wondered if someone has one already got one off that they could do a dimension check ? 8
The Black Bomber Board / Re: 67` Bomber running problems« on: May 18, 2024, 04:16:48 PM »
can anyone supply the following .....as a bloke has asked if I can supply them he will see what he can come up with if anything ?
so he said if you supply me with the diameter of the centre hole and the p.c.d. with hole diameter and the number of holes and the chain pitch well I Know it is a 530 pitch chain but Not the other bits ![]() 9
The Black Bomber Board / Re: 67` Bomber running problems« on: May 18, 2024, 03:49:24 PM »
Hi Guys
yes it is a big ask to try the 17T front just wanted to bring the revs down as its doing about 6.000 rev`s at 55 mph so was just going to try that set up...... But ha ho can`t even get a rear sprocket..... I am Not a Rich man ..... and about a £100 + P+P for a sprocket is just Dam robbery....... Like you say Ash they must be someone doing an after market one... BUT I can`t fined one :'( PS, I am Not used to the high Revving Honda ![]() 10
The Black Bomber Board / Re: 67` Bomber running problems« on: May 17, 2024, 06:26:52 PM »
Hi
yes it is 35 std so would like to get one of them..... I don't know what it will pull like as I got a 17T Front one to go on and std is 15T so will have to see...... just need to get a 35T rear. 11
The Black Bomber Board / Re: 67` Bomber running problems« on: May 17, 2024, 03:38:36 PM »
Hi Everyone
Well been trying to find a rear drive Sprocket for the Bomber but can`t seem to get one ![]() 12
The Black Bomber Board / Re: 67` Bomber running problems« on: May 01, 2024, 06:48:16 PM »
here we go again
![]() Well been trying all day to get a better running Bomber...... it misses sometimes and it pop`s on the over run well most of the time it doo, I have this morning taken off the cam covers and re-done the Valve clearance`s also looked again at the ign Timing checked out and re-gaped the plugs also set the mixtures using a colour tune which I got to a Nice Blue colour, the other thing I thought about is if there was a leak in the exhaust somewhere........... I still wonder if it is running rich or lean around that 1/4 throttle opening ? Weather being kind i`ts the vintage run on sunday....But I keep Trying to sort it dont no what else to try ? ........... don't know if its still something to do with the Kits that Ashely said about ....... and Main Jet by the way is the standard 125 ...but I have not got any bigger ones to try if it needs to go that way LOL ![]() 13
The Black Bomber Board / Re: 67` Bomber running problems« on: April 20, 2024, 10:23:37 PM »
Thanks Dave
yes that was the best result of the day................. Dam Scooters lol But well chuffed Thanks ![]() 14
The Black Bomber Board / Re: 67` Bomber running problems« on: April 20, 2024, 10:11:57 PM »
Hi Guy`s
Just an update..... well after it rained and I thought I would Not Take the Bomber to the show rain all cleared up by 10;00 am so my mates on there CL305 and CB77 super hawk got to the show...... had a Great day None of us won anything tho as the scooter lot seemed to win it all ( yes well what can I say ![]() cheers Mo 15
The Black Bomber Board / Re: 67` Bomber running problems« on: April 16, 2024, 06:51:05 PM »
Yes thanks it is good news after all the problems I have Had..... but thanks to all you Guy`s on the Honda Forum and Ashley who has helped me out big time and hope he can help out on the last thing I require to finish it right off is the Carb kits that he said back in the day to sort out that Dam Flatspot at the 4,000 rev range.... as he said them at the DSS did Not even Know about them even when he sent them the info for them either
![]() Thanks all Mo |