Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - teenybop1

Pages: [1] 2 3
1
CB350/400 / Re: This piston must need replaced?
« on: January 23, 2024, 07:59:09 AM »
Some people disagree but i have always had good service from him, buy the kit with the seal and clean the seal groove out meticulously

I too have had parts from "Honda Classics" without problems & delivered quickly - I think it's the  restoration side of the business where they fall well short of any sort of perfection. It might be they were good at restoration in the past but Peter's (teenybop1) recent experience illustrates how far that side of the business has slipped.

Like my Dad used to say a workshops reputation is only as good as its worst mechanic.
That is probably why good bike restorers tend to be one man bands who guard their repuaution that takes years for them to build & why they often become  expensive.
100% correct Ted, clearly whoever done the restoration side has left the business, leaving a parts man/marketing guy to attempt to provide a service. And failing miserably.its a handy shop to pick up parts, before a new owner steps into the driving seat, ps, shop isn't failing, owner just wishes to retire  :P
If anyone has ever had them do any restoration work within the past 3years or so, it would be interesting to hear about their experiences. They do claim to be a restoration specialist after all. A full report on the condition of my bike on return, was provided by the skilled engineer who sorted it out properly, and is available to view. I believe honda classics no longer accept restoration work, due to the impending sale. I wish any new owner the best of luck.

2
Member 4 Sales / Re: MY 400F FOR SALE - Christmas SALE £3500 ono
« on: January 06, 2024, 01:02:32 PM »
 Brilliant  ;D

3
Member 4 Sales / Re: MY 400F FOR SALE - Christmas SALE £3500 ono
« on: January 04, 2024, 07:32:17 PM »
I will buy your engine bars if you want to sell them :-), regards Peter

4
CB350/400 / Re: Coming to terms with my inner Luddite!
« on: December 02, 2023, 01:00:18 PM »
I've just had my 400 4 returned to me after nearly 3years of refurbishment,(2 years wasted). butchered boyer system ditched and it's back to the original points system. It will be spring before I get to test it properly though. Waited this long so another couple of months won't hurt.

5
CB350/400 / Re: Speedo dial colour changes
« on: November 24, 2023, 09:52:58 PM »
I've just found the old /original speedo from my 400 four in a box of bits, no inner KPH markings. It's a 1977 reg bike.

6
CB350/400 / Re: Speedo dial colour changes
« on: November 11, 2023, 08:01:31 AM »
Something else ticked off the list.

7
CB350/400 / Re: Speedo dial colour changes
« on: November 11, 2023, 05:57:29 AM »
Do you mean like this Dave?

(Attachment Link)
Lol I've seen that speedo before,, it  had a different needle than the tacho, just something else added to the growing list, unfortunately. :-)

8
Those brass ones look fantastic.

9
CB350/400 / Re: Some assistance re venders...
« on: September 27, 2023, 09:53:44 AM »
True story of the standard of work that has been done by a so called restoration specialist,, ps, just been informed that the offer to pay for any substandard work found has been removed, seems I'm making a mountain out of a molehill. And his lawyer is looking into my claims, hopefully his lawyer is checking Instagram and the mess that's needing sorted.

10
CB350/400 / Re: Some assistance re venders...
« on: September 23, 2023, 12:41:03 PM »
What are we looking at there.

I studied the pic and can't see what damage he's referring to, float tab? the towers where the rod goes through?
it's all in the videos I have been sent, along with the other issues that I've been left with, charged for.

11
CB350/400 / Re: Some assistance re venders...
« on: September 23, 2023, 12:10:16 PM »
More evidence that the rebuilt carbs pics are fake, the truth comes out under close inspection.

12
CB350/400 / Re: Some assistance re venders...
« on: September 12, 2023, 09:03:40 PM »
It looks as if the restorers have used Gerbens photos.
Roger at honda classics restoration says he done the work,, https://media.tenor.com/HxkGW9Wb5GUAAAAM/pinnochi

13
CB350/400 / Re: Some assistance re venders...
« on: September 12, 2023, 07:42:13 PM »
Did you have an inline filter fitted to your carbs before it went in as those have one fitted. If you didn't where have those carbs come from?

What's up with number 4 carb?

I presume the restored carbs are from Gerben, they look like his work.
no there was no inline filter on mine. I had a mate check out the pics and he done a search,, they are fake. I know Roger is getting to hear about these claims, from a member here, that's not a problem, I saw his reply to my review of his company.,it's well seeing he is a marketing guy, he spins a good story. But it's only 144 miles from Leyland to Daventry, so we will see how he responds in person when I pay my next visit. I hope he hasn't sold the company by then of course, since it's a wonderful op for some unsuspecting buyer.. The guys a cheat, and I don't appreciate being conned.

14
CB350/400 / Re: Some assistance re venders...
« on: September 12, 2023, 06:45:31 PM »
Pic of the bike before it went to Daventry, my ocd would never, ever allow my carbs to get in that state, plus the after pics are definitely not on my bike, the fuel lines are cheap thin plastic, absolute junk If anyone has a number four carb for sale, , you can see the how things progress on Instagram. Cheers Peter

15
CB350/400 / Re: Some assistance re venders...
« on: September 12, 2023, 06:14:34 PM »
Before and after,
The before are not off my bike,, and the after are not the ones fitted, seems I'm needing a number 4 carb.
The carbs that are fitted by HCR, are a complete shambles.

Pages: [1] 2 3
SimplePortal 2.3.5 © 2008-2012, SimplePortal