31
CB750 / Re: WTF Exhaust
« on: May 01, 2024, 05:03:57 PM »
It only says new stainless exhaust NOT original
Try our new info resource - "Aladdin's Cave" (Main menu)
Just added a separate link to Ash's Dropbox thread (shortcut)
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to. 31
CB750 / Re: WTF Exhaust« on: May 01, 2024, 05:03:57 PM »
It only says new stainless exhaust NOT original
32
CB350/400 / Re: Power consumption, E-ignition vs Points. also - spare advance cam?« on: May 01, 2024, 05:00:43 PM »
Boyer fire all the plugs all the time
33
Misc / Open / Re: long covid« on: May 01, 2024, 04:59:06 PM »
As my wife suffers from ME what annoys us is the symptoms are VERY similar but ME sufferers get no help at all, long covid seems to be getting lots of help
34
Misc / Open / Re: BUSSO CEASING TRADING« on: April 29, 2024, 11:36:32 AM »
A lot of us people will not be happy as they are waiting for 750 units
36
CB500/550 / Re: Rocker Housing - Stuck??« on: April 28, 2024, 03:46:23 PM »
It never has in all the years i been doing them, BUT i do make sure the nut runs free
37
CB500/550 / Re: Plugs fouling at idle« on: April 28, 2024, 03:44:46 PM »
Why not? If you can design for whole numbers you can design for half way
38
CB500/550 / Re: Rocker Housing - Stuck??« on: April 27, 2024, 10:30:19 PM »
You dont ever use the slot anyway, when building before fitting cam stick fingers down tunnel, push slipper to carbs and hold whilst nipping up locknut then just undo when built and holding pressure on kickstart, nipping up whilst holding pressure.
Check the tensioner fold over tabs are crimped over tight to hold theteeth on the bolt in mesh with the rack, people forcing the screw slot in the false idea that this will tension the chain is what damages the meshing in the first place 39
CB500/550 / Re: Rocker Housing - Stuck??« on: April 27, 2024, 09:46:05 PM »
As long as the nut screws on leave it alone as you dont need that slot
40
CB500/550 / Re: Rev counter blank« on: April 27, 2024, 05:12:27 PM »
With the drive gear of course!
41
Misc / Open / Re: Parcel Force.« on: April 27, 2024, 04:16:26 PM »
Its the way they charge you extra for collecting hmrc's cash that gets me and that hmrc charge tax on a tax (vat on duty)
42
CB350/400 / Re: Reaching tail light wires« on: April 27, 2024, 03:46:21 PM »
Not normaly that tight a fit if routed right
43
CB500/550 / Re: Rev counter blank« on: April 27, 2024, 03:44:03 PM »
Just leave the cable off but fit the drive housing, there is an oil seal in there
44
CB500/550 / Re: Rocker Housing - Stuck??« on: April 27, 2024, 03:42:35 PM »
The washers stick in the head recesses but if really missing are still available new.
On the adjuster is the thread stripped all the way down or just at the end? Honda should never have put that slot in there it gets abused. New pattern ones are available but expensive and dont often come up used in good order any more. I MAY have a used one but it wont be cheap 45
CB500/550 / Re: Rocker Housing - Stuck??« on: April 27, 2024, 03:40:24 AM »
Yes they sieze for a passtime, not sure if they can go all the way through either hole as never tried it, the always move eventually
|