Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - casperdog

Pages: 1 [2]
16
CB750 / Re: 341 repo exhaust fitting issues.
« on: May 07, 2019, 10:12:06 PM »
Thanks trigger, the bike came with a set of oem pipes on (but with holes) and when they are fitted the stand is well clear, so i don't think that is the problem.
The new upper exhaust definately sits slightly further out and wanted to ask if it was normal for these repo's.
Cheers
Phil


17
CB750 / Re: 341 repo exhaust fitting issues.
« on: May 07, 2019, 09:42:42 PM »
I did thinks of that and had a look at the image on the parts list and it looks the same. Different to the k3 and k4 because it has that "loop" welded on the front
The bike is a USA k5.
Thanks




18
CB750 / 341 repo exhaust fitting issues.
« on: May 07, 2019, 08:28:48 PM »
Sorry if this has been covered before but bear with me please  :)
I'm having a few problems making them fit and would like to ask a question regarding the left hand upper.
Can i ask if anyone has a set of 341 repo's on their 750 would they be kind enough to take a look at the left upper and see where the top seam lies.
On my original set of exhausts the seam is directly in line with the end of the footpeg bracket stud.
[ Guests cannot view attachments ]
But on the repo one the seam is about 15mm further out from the end of the stud.
[ Guests cannot view attachments ]
I would be interested to know if they are all like this or just mine because one issue i'm having is the side stand hitting the pipe.
Many thanks in advance
Phil



19
New Member Introductions / Re: Hello
« on: May 04, 2019, 04:31:56 PM »
Thanks all, bike is a Canadian import but originally from USA i think.
The photo is a few weeks old, now got all back end on and seat pan.
Got a shiney new set of pipes from DSS but i've encountered a few fitting issues with them which hopefully is being resolved. (they're sending me another upper right).
I've shaped the foam from the armchair seat that it came with, and i intend to try and fit a K1 cover which i prefer the look of.
The only thing i need now is an original left hand side panel (if anyone has one for sale???) and a paint job when i've finished.
Cheers
Phil
[ Guests cannot view attachments ]

20
New Member Introductions / Hello
« on: May 03, 2019, 02:06:52 PM »
Hi, I've been on the .net site for a while and only just realized there was a UK version.
I bought a CB750k5 late last year and currently in the process of a light restoration. It was a non runner but after cleaning the carbs, sorting the points, a set of plug caps, plugs, new oil and filter etc etc it fired up virtually straight away.
I've fitted new bearing all round and swingarm bushes and after countless hours of scraping, cleaning and polishing i'm nearly there!
Looking forward to its first outing...
Cheers
Phil.
[ Guests cannot view attachments ]




Pages: 1 [2]
SimplePortal 2.3.5 © 2008-2012, SimplePortal