46
CB350/400 / Re: My New Project arrives after a 44 year wait!
« on: April 19, 2024, 04:20:46 PM »
Dave, i have a robbed set of 400 carbs, you can have what you want for postage
Try our new info resource - "Aladdin's Cave" (Main menu)
Just added a separate link to Ash's Dropbox thread (shortcut)
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to. 46
CB350/400 / Re: My New Project arrives after a 44 year wait!« on: April 19, 2024, 04:20:46 PM »
Dave, i have a robbed set of 400 carbs, you can have what you want for postage
48
Site Feedback / FAQ / How to... / Re: how do you see sent personal messages?« on: April 18, 2024, 05:02:58 PM »
Tried it once, buggered up my old dumfone so never again
49
CB500/550 / Re: Oil pressure relief valve removal« on: April 18, 2024, 07:57:34 AM »
Trigger had one stuck, or wrongly assembled from new and the pressure cracked the oil filter housing so i doubt yours is stuck solid.
The bolts inside the cam cover O ring should have copper wasers under the heads and the brackets for the end caps alloy ones 50
CB500/550 / Re: Where to Start?« on: April 17, 2024, 08:53:59 PM »
The full Honda manual is there but you have to start with the 500 then all the supplements till you get to your model.
No real order for stripping but if you are going to do engine work it makes it easier and lighter to get out if you remove the head and barrels first. Get an impact screwdriver with JIS bits and a 3/8 drive socket set with both long sockets and six sided 51
Desperately Seeking!! / Re: CB500K1 1975 Neutral rotor & contacts , primary driven sprocket, main jet holder« on: April 17, 2024, 01:38:40 PM »
I ccan do you a nos rotor and the main jet leaf springs do appear on a US website when in stock but only in sets of 4, stainless and not cheap.
Can pprobably find a used spring But these and the rotors are now like hens teeth so not cheap pm me if interested. Ask nurse Julie if Trigger has any of the stator contacts left he had etched a long while ago. Do you mean the primary chain sprocket on the shaft? Never seen one worn 52
CB500/550 / Re: Mysterious CB500 clutchcable in original Honda packaging with correct partnumber« on: April 16, 2024, 08:46:31 PM »
Like i said the taiwanese manufacturers did not care and put on whatever the buyer wanted
53
CB500/550 / Re: Mysterious CB500 clutchcable in original Honda packaging with correct partnumber« on: April 16, 2024, 01:56:49 PM »
All the original cables i saw in the 70's had a black lining on the inner cable and should have had a white inner coating on the outer but you only saw that if the outer was damaged.
I also know for a fact that the taiwanese manufacturers at the time would package anything in the way the buyer asked, i bought many Yamaha FS1E cylinders in packaging identical to original. Honda cables normaly had the part number in white on the outer sleeve. I doubt that Honda will do anything as you do not know where it originally came from, that dealer is gone so cannot provide purchase details and finaly time in stock 54
Misc / Open / Re: Barn find!« on: April 15, 2024, 07:26:24 PM »
Thats a good price, i have a freing in nashville and a medium box is $30
55
Misc / Open / Re: Barn find!« on: April 15, 2024, 03:47:26 PM »
Dont forget usps only do air mail and as soon as you say "fuel" its a special item, even if new and never had any in it
56
CB500/550 / Re: 550 front brake rebuild« on: April 15, 2024, 03:42:21 PM »
Looking at that i suspect the caliper is as bad so i would use a greas gun to pump the caliper piston out then thouroughly clean, reseal and new stainless piston.
Grease gun method Standard grease gun remove the fitting that clips on the grease nipple. Leave bleed nipple in Remove the steel brake pipe from caliper and caliper brom bike GENTLY screw the caliper pipe thread onto the grease gun N.B. it will only go on a few threads as they are different BO NOT FORCE IT. Pump away and watch the piston for movement. This has never failed me but does leave the piston full of grease to clean out! 57
CB500/550 / Re: Common wire« on: April 15, 2024, 08:26:12 AM »
It depends on exactly which bike it is please specify as there are two different ways it works and youcan dodamage if you do it wrong
58
CB500/550 / Re: CB 500 Four K1 - right hand upper exhaust pipe« on: April 13, 2024, 08:39:07 PM »
Nobody sells seperate pipes anymore only sets, cheapest was posted on here a while ago but for you cms in netherlands might be a better bet
59
CB500/550 / Re: CB550 starting but won’t tick over« on: April 13, 2024, 08:36:08 PM »
Also points surfaces corrode when not used and pivots sieze up
60
The Black Bomber Board / Re: 67` Bomber running problems« on: April 13, 2024, 07:07:56 PM »
I dont believe Honda would design it so you had tofit to lower case and get opperating mech out of way to mate cases but i suppose anything is possible, none of the other hondas i have worked on 50cc tp 1500cc have done that
|