Honda-SOHC
Other Stuff => Misc / Open => Topic started by: haynes66 on January 09, 2021, 07:55:26 PM
-
anyone know where i can get similar wiring loom clips as used on the 750? the ones with the black wrap around it
-
Yamiya ;)
-
that is awesome! many thanks. i've never bought from japan before. is carriage expensive? the clips are only around a tenner
-
Depends on how much you spend, including postage, if HMRC and post office get involved
-
Hi,
Might be of use - had a similar issue with the CJ250t that has a bracket with two plastic coated cable clamps that were badly perished.
Found a work-around using heatshrink and came out OK.
[attach=1][attach=2]
Also needing just a couple of wire ties it seems these are either very pricey or only available in far flung parts of the world so I finally found bare ties from Auto Electric Supplies and then used heatshrink to make a passable version of the original ties.
[attach=3][attach=4][attach=5]
Cheers,
Andy
-
thank you. someone on another forum told me that lambretta ones are similar and readily available so i've ordered a pack to see how they look
-
Hi,
Might be of use - had a similar issue with the CJ250t that has a bracket with two plastic coated cable clamps that were badly perished.
Found a work-around using heatshrink and came out OK.
(Attachment Link) (Attachment Link)
Also needing just a couple of wire ties it seems these are either very pricey or only available in far flung parts of the world so I finally found bare ties from Auto Electric Supplies and then used heatshrink to make a passable version of the original ties.
(Attachment Link) (Attachment Link) (Attachment Link)
Cheers,
Andy
Thanks for the tip, great website. :) :)
-
Hi,
Might be of use - had a similar issue with the CJ250t that has a bracket with two plastic coated cable clamps that were badly perished.
Found a work-around using heatshrink and came out OK.
(Attachment Link) (Attachment Link)
Also needing just a couple of wire ties it seems these are either very pricey or only available in far flung parts of the world so I finally found bare ties from Auto Electric Supplies and then used heatshrink to make a passable version of the original ties.
(Attachment Link) (Attachment Link) (Attachment Link)
Cheers,
Andy
Great tip👍👍
-
Agree. Good info.
-
i'll try to post some pics later but i got some lambretta clips and some 9.5mm black heatshrink from screwfix and they look ok