Honda-SOHC

SOHC.co.uk Forums => CB350/400 => Topic started by: Athame57 on October 05, 2020, 04:53:13 PM

Title: Wire to pass signal
Post by: Athame57 on October 05, 2020, 04:53:13 PM

I fitted the new left hand switch gear to my CB400F2 today, it was harder than I thought, in no small part to be forced to 'knock around' a seized and stripped bolt. But plugging in all the male ends into the females didn't seem to be 100% right but that said the only thing that isn't working is the pass (flash) switch. Is the wire involved a pale aqua green one? I  discovered the female wire from the loom end was only a few inches long and going nowhere, it must have broke so I'm wondering what to do. I never use the signal so I might leave it like that.

Title: Re: Wire to pass signal
Post by: Nurse Julie on October 05, 2020, 04:58:45 PM

Pale aqua green is the horn George.

Title: Re: Wire to pass signal
Post by: Athame57 on October 05, 2020, 05:09:20 PM

So that's why it won't work!  ::)  I'm going to have to splice that wire.