Honda-SOHC

SOHC.co.uk Forums => CB500/550 => Topic started by: fazer1k on October 25, 2009, 11:29:11 PM

Title: Motad Exhaust F1/2 on a K3
Post by: fazer1k on October 25, 2009, 11:29:11 PM: Would a Motad 4/1 listed for a CB550 F1/2 fit straight onto a K3 ? If not, can it be easily made to fit ?!

Thanks,

Ian
Title: Re: Motad Exhaust F1/2 on a K3
Post by: Bryanj on October 26, 2009, 06:29:10 AM: You will have to modify the silencer bracket/centre stand stop otherwise all fits ok
Title: Re: Motad Exhaust F1/2 on a K3
Post by: MIKE550/4 on October 26, 2009, 11:14:53 AM: i am awaiting a reply on e bay for a motad exhaust with same question , i am after an exhaust for my k3 ,

is this the same exhaust you are looking at ? would be pointless to bid against each other
Title: Re: Motad Exhaust F1/2 on a K3
Post by: daz on October 26, 2009, 06:07:18 PM: Hi Ian, i have a brand new motad for your bike,
Title: Re: Motad Exhaust F1/2 on a K3
Post by: fazer1k on October 26, 2009, 11:28:47 PM: Quote from: MIKE550/4 on October 26, 2009, 11:14:53 AM
i am awaiting a reply on e bay for a motad exhaust with same question , i am after an exhaust for my k3 ,

is this the same exhaust you are looking at ? would be pointless to bid against each other

If the seller is based in Hull then it probably is ? :)

Looks like there may be a a lot of interest, did you get a reply ?
Title: Re: Motad Exhaust F1/2 on a K3
Post by: fazer1k on October 26, 2009, 11:32:36 PM: Quote from: daz on October 26, 2009, 06:07:18 PM
Hi Ian, i have a brand new motad for your bike,
Title: Re: Motad Exhaust F1/2 on a K3
Post by: fazer1k on October 26, 2009, 11:33:23 PM: Quote from: Bryanj on October 26, 2009, 06:29:10 AM
You will have to modify the silencer bracket/centre stand stop otherwise all fits ok

Thanks Bryan.
Title: Re: Motad Exhaust F1/2 on a K3
Post by: MIKE550/4 on October 27, 2009, 10:14:53 AM: yes mate hull ,

he does not know told me to get in contact with motad,

sure bryan will be right though, bracket will need a bit of modifying, 4 into 4 bracket i have would seem to be specific to the k3 exhausts
Title: Re: Motad Exhaust F1/2 on a K3
Post by: fazer1k on October 27, 2009, 02:23:13 PM: Quote from: MIKE550/4 on October 27, 2009, 10:14:53 AM
yes mate hull ,

he does not know told me to get in contact with motad,

sure bryan will be right though, bracket will need a bit of modifying, 4 into 4 bracket i have would seem to be specific to the k3 exhausts

Feel free to bid, I'm going to look at alternatives....good luck with the auction !
Title: Re: Motad Exhaust F1/2 on a K3
Post by: Bryanj on October 27, 2009, 02:42:10 PM: Needs altering as the rear footrests, to which the bracket bolts, are in a different place. Last one i did took 5 mins but needed a welder
Title: Re: Motad Exhaust F1/2 on a K3
Post by: daz on October 27, 2009, 05:56:23 PM: Hi Ian, my location is Portsmouth Hampshire, thanks Darren
Title: Re: Motad Exhaust F1/2 on a K3
Post by: daz on October 27, 2009, 07:07:23 PM: motad for 550 f models has M55H stamped on silencer, for 500 & 550 k0, k1, k2 & k3 has M5H stamped on silencer