Honda-SOHC

SOHC.co.uk Forums => CB500/550 => Topic started by: AndyS on January 19, 2020, 09:56:12 PM

Title: CB500 Four K0 - Front Mud Guard Fixings
Post by: AndyS on January 19, 2020, 09:56:12 PM

My front mud guard stays and top fixing bolts are missing some of the rubber grommets which go through the fixing holes - I have looked on the parts site CMS and the parts diagram does not list any rubbers though the fixing holes.  Does anyone know if this model had the rubbers isolators, if so any idea of the part numbers.  Thanks Andy

Title: Re: CB500 Four K0 - Front Mud Guard Fixings
Post by: Bryanj on January 19, 2020, 11:41:08 PM

The original mudguard had smaller holes and no rubber fixings. The only mudguard available now needs the rubbers. Look up a 550 K1 i think that has the rubbers dont forget where there is a rubber there is a top hat steel washer

Title: Re: CB500 Four K0 - Front Mud Guard Fixings
Post by: AshimotoK0 on January 19, 2020, 11:42:01 PM

No but the replacements DS sell need them as the guard is really a later 750 part

Title: Re: CB500 Four K0 - Front Mud Guard Fixings
Post by: AndyS on January 20, 2020, 09:47:16 AM

Thanks for the fast replies - looks like I have a 550 front mud guard.

Title: Re: CB500 Four K0 - Front Mud Guard Fixings
Post by: Trigger on January 20, 2020, 09:52:41 AM

It maybe a late 750 one.
The part numbers for the rubbers are 40513310000 and the top hat spacers are 40514310000. Not cheap for a full set but, you can just use M6 x 18mm BZP washers  ;)