Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - 10tenmen

Pages: [1] 2 3 ... 5
1
CB350/400 / Trying to track down a CB400f
« on: December 27, 2020, 04:56:17 PM »
Hi I wonder if any of our members know the current owner of a 1976 Blue Honda CB400f registration RBH 72R. It is presently not taxed and the last V5 was issued 27th November 2018.
There is a good chance it’s still out there it was originally from the Bedford area.
Many thanks.

2
CB350/400 / Re: CB400F Parts Wanted
« on: October 09, 2020, 09:47:33 PM »
Did you get a set of turn signals

3
CB350/400 / Re: Strobe
« on: March 29, 2020, 05:49:16 PM »
Get one from the correct period lol, it works really well.

4
Project Board / Re: Lets build a SOHC for less than a grand
« on: February 03, 2020, 09:33:43 AM »
Trigger I am in awe of your craftsmanship it’s a joy to see and read, can’t wait to see the finished article.

5
CB500/550 / Re: Gerben question
« on: December 17, 2019, 01:44:34 PM »
I got mine refurbished by Gerben for the 400/4 I had overflow issues and inability to reach top revs, they arrived back and went straight on and without any adjustment the bike was 100% better, I synced them with a set of vacuum gauges and they required only minor adjustment. Bergen had to replace the four slides and float bowls.
For me it was worth every penny

6
CB350/400 / Set of Gerben refurbished carburettors
« on: December 10, 2019, 11:13:41 AM »
I sent these to Gerben for refurbishment which he has now completed and listed for sale I can attest to the quality of them when done,
https://www.ebay.co.uk/itm/Honda-CB400-CB350-four-4-rebuilt-set-of-carbs-complete/113991151846?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2060353.m1438.l2649

7
Misc / Open / Re: Ex David Silvers 400/4 on Ebay
« on: December 08, 2019, 02:01:10 PM »
£2200 a bit of a bargain imho

8
Misc / Open / Ex David Silvers 400/4 on Ebay
« on: December 08, 2019, 10:28:08 AM »

9
CB350/400 / Re: carburettors
« on: November 02, 2019, 11:12:49 AM »
Hi Rosco,
I got mine back recently and re fitted then and it fired up first time a slight adjustment to the tick over and it ran sweet as a nut, no leaks I took it for a 70 mile run and the difference was night and day.
Just got to sync them next which I aim to do this week weather permitting.

10
CB750 / Re: CB750 K1 Tool Kit?
« on: October 29, 2019, 07:05:56 PM »
I went to San Francisco to 4 into 1 and bought a full genuine tool kit including tyre levers for the 400/4 saved a fortune collecting it myself.

11
CB350/400 / Re: Carburettors before and after pictures
« on: October 23, 2019, 03:16:48 PM »
Fitted the refurbished carbs today straight on no leaks (result) and I cannot tell you how much better it runs it now pulls to the red line a lot easier and is quieter than before and as a plus they look fantastic.
A big thumbs up to Gerben.

12
CB350/400 / Re: Clock refurb
« on: October 21, 2019, 03:42:33 PM »

13
CB350/400 / Re: Carburettors before and after pictures
« on: October 21, 2019, 01:24:44 PM »
Mine was £175 + cost of sending which was £20 insured using Hermes return delivery included by Gerben, I paid extra for the replacement parts and he only uses the best quality seals and gaskets.

14
CB350/400 / Re: Carburettors before and after pictures
« on: October 21, 2019, 08:46:42 AM »
Tricky well spotted mine were so badly damaged they had to be replaced and Gerben only had 4 off the same handed ones that were suitable I’m sure they will be fine for me.

15
CB350/400 / Re: Carburettors before and after pictures
« on: October 20, 2019, 10:13:03 AM »
Hi Julie quite agree looks a top job I couldn’t get them done in this country for less than £350 so very pleased with the outcome. I will get it running then try syncing them. I have done the valVe clearances and checked the timing so fingers crossed I will have eliminated the top end bogging down issue.

Pages: [1] 2 3 ... 5
SimplePortal 2.3.5 © 2008-2012, SimplePortal