This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Messages - 10tenmen
31
« on: September 21, 2019, 11:53:39 AM »
Took the exhaust off to clean it and had the collets blasted due to lack of chrome lol, what’s the best high temperature paint to use for painting them.
Ive also sent the carbs off to Bergen in Holland for the full works so I’m not in a rush.
32
« on: September 18, 2019, 05:09:37 PM »
Hi Oggie, top man it was my pleasure we are riding to Seeways tomorrow around noon. I bet you are doing that work thing lol 😂
33
« on: September 11, 2019, 06:34:38 PM »
That’s the wonderful thing about being an individual you can make your own choice as to what suits you.
34
« on: September 11, 2019, 01:11:00 PM »
Brilliant suggestions thanks everyone 
35
« on: September 10, 2019, 10:05:16 PM »
True but I like the old style plate and it’s legal for that year of bike.
37
« on: September 10, 2019, 08:02:30 PM »
Plate on and we’re off.
38
« on: September 10, 2019, 08:00:50 PM »
All done with the clocks turned out ok not too sure about the led bulbs may try some less bright.
39
« on: September 10, 2019, 01:41:47 PM »
Tread looks great on my front tyre it’s a Cheng shin 2.75 x 18 Great tread but the manufacturer date is 0902 March 2002 don’t think that will be staying on lol
40
« on: September 08, 2019, 09:37:17 PM »
Got the uk registration through it’s now an N reg cheers.
41
« on: September 08, 2019, 05:31:44 PM »
Got the paint to touch up the needles and the 70mph mark On the new fascia just waiting for the paint for the cups which I have prepped with wet and dry.
Before and after pics.
42
« on: September 08, 2019, 01:23:20 PM »
Hi thanks for the advice I received the registration document this morning it’s officially an N registration just got to get the plate made now they even did the tax for me.
43
« on: September 06, 2019, 04:57:14 PM »
Last pic of panching plate B.
This is why I like this forum so much information lol
44
« on: September 06, 2019, 04:56:33 PM »
Hi after reading a post earlier I realised I didn’t have the lower air filter part on my bike I only had the breather chamber which was not connected.
It consists of the breather pipe from the head to the chamber then it filters gasses back up into the air filter box, this is all situated below the filter area.
I managed to source the panching plate A, our good Nurse Julie posted how to make a filter from a scourer and I then made the panching plate B from the inside of a used air filter as this part is discontinued.
The parts in the diagram are numbers 24, 25 & 26
45
« on: September 05, 2019, 08:18:34 AM »
Thanks for the replies both very helpful Peter I have a model shop nearby I will go there thanks.
|
Show Posts