Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - paulbaker1954

Pages: 1 ... 27 28 [29] 30 31 ... 47
421
CB500/550 / Re: Garage clear out
« on: March 26, 2018, 11:55:21 PM »
Here’s are some pics of seat my contact is looking around 300. Is that reasonable for a mint original seat? I have no idea!,


422
CB500/550 / Garage clear out
« on: March 26, 2018, 04:39:58 PM »
Just had a bit of a root around the garage and I have the following available if anyone is interested pm me

1) Full 500 four clutch , good plates in spec, springs, basket, lifter, shim etc

2) Two aftermarket coils CML612 units.They are 5 Ohm primary and 17 Ohm secondary. I bought them last year but never used them as I ended up going full Boyer kit

3) Two original coils working but worn. The outer ht coverings are a bit brittle and have cracked at the entry to the coils but they do work fine

4) Another contact has an original NOS K0 seat in mint condition. Apparently they are as rare as hens now. I can put you in contact here if anoyone is interested


PM with a sensible offer if anything is of interest. They are all on fleabay but rather a forum member benefited


423
CB500/550 / Re: CB500 Mirrors
« on: March 26, 2018, 02:47:57 PM »
Pics hopefully here for Phil

424
CB500/550 / Re: CB500 Mirrors
« on: March 26, 2018, 12:45:16 PM »
I have a rhs OEM one

Pm me if of any interest

425
CB500/550 / Re: Bizarre rev counter problem
« on: March 25, 2018, 05:46:42 PM »
Hi again Peter
Thanks for the advice. I pulled the gauge today and yes there is quite a lot of slop in the drive bush ( at leas a mm I’d say)

I have sourced another counter from fleabay that the PO knows works well so will go for the replacement option and see what happens

Will post results as and when I can get back on the road once this hernia op has eased off some more

426
CB500/550 / Re: Bizarre rev counter problem
« on: March 24, 2018, 04:36:30 PM »
Thanks Peter i will check the spindle as you say

If it is sloppy is there any fix or is it a replacement gauge?

427
CB500/550 / Re: Bizarre rev counter problem
« on: March 24, 2018, 03:14:25 PM »
Thanks for replies
Julie all I can say is thank god for Lactulose!!!!!

Hairy hit it is am OEM cable and I have tried different routes all to no avail

Phil I may take you up on your drive offer when proper walking returns (my wife says I remind her of the 2 soups sketch)

This problem is driving me nuts I have to say

428
CB500/550 / Bizarre rev counter problem
« on: March 24, 2018, 11:46:18 AM »
Ok I am stumped, rev counter sticks and jumps around above 5k. It seems to be not consistent though sometimes it sticks at 5 then jumps up all the way to 7 or sometimes just plain jumpy.

I have striped the unit and all seems good inside, running it up using a drill on the end of the cable it’s as smooth as anything all the way through the range.

I have tried different cables all to no avail

I am beginning to wonder if it may have something to do with the worm drive off the cam but it looks ok.

Questions

1) anyone any ideas, Iam sure I have isolated the counter and the cable as not being the root cause.?


2) would anyone have a spare worm drive I can borrow for a couple of weeks to try to see if that fixes the problem?Happy to pay postage 2 ways of course.

No urgency as am off road for a few weeks following Inguinal Hernia op so can’t get my leg over so to speak. Julie it is sodding painful by the way!


429
I am planning to be there

Hey Oddjob sorry to hear your news hope you improve soon.

AS I read it it's Iron overload - is that from fettling all those Honda parts LOL. Sorry but you have to look on the bright side of life I find.

As for me bloody Hernia op next 2 weeks.

None of us are getting any younger it seems  :) :) :)

430
CB500/550 / Re: Chocolate Valve Guides? Strange CB500 Head?
« on: January 19, 2018, 11:39:57 PM »
Here’s my 71 K0 500 head which does not have this feature

431
CB500/550 / Battery is it goosed?
« on: December 30, 2017, 05:34:33 PM »
Just noticed my 2 year old battery (Nitro YB12A-A) was struggling on cranking. I keep it topped up with an optimiser.

Just checked and it needed a massive top up so must have been halfway down cells - agggh!!!

Topped up and back on charge but will it be buggered having got so low or will it recover?

Interesting that I heard using optimisers tends to dry em up, anyone confirm this.

432
CB500/550 / Re: Primary drive reduction ratios
« on: December 13, 2017, 10:46:17 PM »
Cheers Seabeowner at least it confirms my own calcs

Good to know I wasn’t  going crazy then!!!

433
CB500/550 / Re: LED clock lights
« on: December 11, 2017, 07:01:06 AM »
Roy
I am really interested in this question. I am no electrical guru but I notice the 500 uses a 2 wire flasher relay whilst the 550 uses a 3 wire relay.

Be most interested if someone can clarify this point


434
CB500/550 / Re: LED clock lights
« on: December 10, 2017, 05:51:38 PM »
The bulbs are a BA9S fitting just look for BA9S LED BULBS on flea bay, there are loads 👍👍

435
CB500/550 / Re: LED clock lights
« on: December 10, 2017, 05:29:59 PM »
How did you wire the indicator light as the indicators change polarity left and right. Therefore the LED should only work on one side as it's a diode that only allows current in one direction?

Roy I must be really dumb but looking at the 500 wiring diagram I don’t for the life of me see how they change polarity can you expand

Pages: 1 ... 27 28 [29] 30 31 ... 47
SimplePortal 2.3.5 © 2008-2012, SimplePortal