Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - Bryanj

Pages: 1 [2] 3 4 ... 674
16
550 and 500 same shape but later ones had a connector bit, the screwed in retainer does not have a seal, only the big tim pressed plate

17
CB750 / Re: Yhc-184 regulator rectifier
« on: May 04, 2024, 08:54:08 PM »
If the people who made it, or those that sold it didnt give you a wiring diagram in my opinion it aint worth using

18
CB500/550 / Re: top end gasket set recomendations
« on: May 04, 2024, 07:05:59 PM »
No matter what set you need thicker O rings at the headgasket than those in the set

19
Out & About / Re: A quick trip in the sunshine on the 550
« on: May 03, 2024, 05:18:45 PM »
Its what happens on that half day in August when nobody is looking

20
CB500/550 / Re: 1975 CB500K1 crank rotation resistance
« on: May 03, 2024, 02:05:01 PM »
Can normally tyrn by hand WITH pistons fitted

21
Misc / Open / Re: Barn find!
« on: May 02, 2024, 10:18:51 PM »
There you go, told you it would be ok!

22
CB500/550 / Re: Swinging arm bushes
« on: May 02, 2024, 08:05:44 PM »
Dave, its only the later ones with a rubber seal, early ones the seal is the felt ring, i think i still used the caps with the bronze bushings though

23
CB500/550 / Re: 1975 CB500K1 crank rotation resistance
« on: May 02, 2024, 08:04:05 PM »
Only thing i can think off is either something between case and shell or the disaster of a bent crank, i have built engines with all black shells with no rotational problems

24
Misc / Open / Re: All gone now 😢😢😢
« on: May 02, 2024, 08:01:17 PM »
But no hallway ornaments!

25
CB500/550 / Re: 1975 CB500K1 crank rotation resistance
« on: May 02, 2024, 01:22:38 PM »
You didnt oil the back of the shell did you?

26
CB750 / Re: WTF Exhaust
« on: May 01, 2024, 06:45:48 PM »
Sold or pulled

27
CB500/550 / Re: Swinging arm bushes
« on: May 01, 2024, 05:08:56 PM »
Usually you find the collar more worn than the bushes, the early one is still available, but bloody expensive, the later one is not available but you can use the early one, preferably with the bolt having a grease nipple at each end rather than the one in middle of swing arm

28
CB750 / Re: WTF Exhaust
« on: May 01, 2024, 05:03:57 PM »
It only says new stainless exhaust NOT original

29
Boyer fire all the plugs all the time

30
Misc / Open / Re: long covid
« on: May 01, 2024, 04:59:06 PM »
As my wife suffers from ME what annoys us is the symptoms are VERY similar but ME sufferers get no help at all, long covid seems to be getting lots of help

Pages: 1 [2] 3 4 ... 674
SimplePortal 2.3.5 © 2008-2012, SimplePortal