This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Messages - Deano400
Pages: 1 2 [3] 4 5 ... 31
31
« on: November 21, 2023, 09:37:29 PM »
32
« on: November 21, 2023, 06:18:31 PM »
Ken, I don't think the harness in the link is a straight fit for the 400. The green wire should have female spade and not a female bullet. Also not that it would stop it working, the 400 is a brown wire not a brown / white. Having said that, a minor mod and it will do the job.
Bradders, I'll check tomorrow if you want.
33
« on: November 17, 2023, 12:48:20 PM »
Hi Dave. Not great news, I have two spare sumps but both have issues. One has already had a thread repair to the sump plug thread, looks like it had been re-tapped with a larger thread and a brass reducer to take the original sump plug. The thread on the second one is ok but it has some minor fin damage. If you don't get any joy elsewhere let me know if you want me to post any pics.
34
« on: November 16, 2023, 08:13:30 PM »
Dave, I may have a sump, I'll have a look tomorrow.
35
« on: November 16, 2023, 08:11:06 PM »
36
« on: November 11, 2023, 10:44:58 AM »
Hi David. Managed to find a few minutes to have a look this morning. See pic. PM me your address if you are interested.
[ Guests cannot view attachments ]
37
« on: November 10, 2023, 05:53:59 PM »
Hi David, Looking at the link you posted of NRP, the 550 clips appear to be the same as the 400. I've got a box of 400 bits in the shed and probably have some clips. I won't get chance to look tomorrow but if you PM me Sunday to remind me, I'll have a look.
38
« on: November 08, 2023, 10:04:47 AM »
Hi Matt. Posted.
39
« on: November 07, 2023, 11:35:30 AM »
Is it possible to add a long extension to the foot pedal so that you can pump by hand with a lot less effort?
40
« on: November 07, 2023, 10:38:55 AM »
Matt, some pics of the kick start.
[ Guests cannot view attachments ]
[ Guests cannot view attachments ]
[ Guests cannot view attachments ]
[ Guests cannot view attachments ]
41
« on: November 07, 2023, 10:37:11 AM »
Could be a mistake in entering the email address so Paypal doesn't recognise it.
42
« on: November 06, 2023, 07:59:11 PM »
Matt, I may have one. PM me tomorrow to remind me to have a look.
43
« on: October 25, 2023, 12:47:40 PM »
From DVLA
Vehicle Details Vehicle make HONDA Date of first registration July 1970 Year of manufacture 1970 Cylinder capacity 750 cc CO₂ emissions Not available Fuel type PETROL Euro status Not available Real Driving Emissions (RDE) Not available Export marker Yes Vehicle status Untaxed Vehicle colour BLUE Vehicle type approval Not available Wheelplan 2 WHEEL Revenue weight Not available Date of last V5C (logbook) issued 22 March 2010
44
« on: October 20, 2023, 12:51:27 PM »
Dave, Did you manage to get a rear upper mounting bolt? If not let me know, I'm sure I've got one, just nned to find it. IIRC it has been chromed though.
45
« on: October 10, 2023, 11:19:59 AM »
Sean,
The seal you are refering to is for the lower crank case left hand side where the selector shaft comes out of the case. There is no seal on the left side starter motor / final drive cover.
Pages: 1 2 [3] 4 5 ... 31
|