Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - SteveW

Pages: 1 2 [3] 4 5 ... 38
31
CB500/550 / Re: Is my cam tensioner too far gone?
« on: February 11, 2024, 08:29:08 PM »
Silvers has the entire assembly for £170 ish, Wemoto has just the blade part which is all I need for £45.

32
CB500/550 / Is my cam tensioner too far gone?
« on: February 11, 2024, 04:43:41 PM »
I have a few hair line cracks but only at each end, should I replace?


33
CB500/550 / Re: Delkevic Exhausts.
« on: February 10, 2024, 11:18:17 AM »
Lot cheaper than David Silvers

35
Misc / Open / Re: Engineering interest
« on: February 02, 2024, 03:08:03 PM »
My metalwork and electronics teacher worked on the Bluebird for the water speed record with Donald Campbell.

When I applied for my electronics apprenticeship he gave me a glowing reference and I was successful.


36
CB500/550 / Re: 1978 USA import CB550 K4 PD46C CARB
« on: January 21, 2024, 07:36:01 PM »
I pulled the ones out of my PD50’s by heating carb body with a hot air gun. Wrapped a pice of rubber tube around the jet and it pulled out pretty easy.

37
Misc / Open / Re: Old Dealer Stickers
« on: January 09, 2024, 12:44:28 PM »
I have this on my 1964 Vespa V90

38
Can’t think why 😳

39
CB500/550 / Re: It’s home at last!
« on: December 26, 2023, 12:45:57 PM »
I need to remove mine to restore it. Do you lever it out from the front or remove the whole alternator cover and push it out from the back?

40
Misc / Open / Re: Handy Plastic Repairs?
« on: November 14, 2023, 03:40:13 PM »
I’ve used the baking soda / superglue method, it’s works very well. Sets like rock instantly.

41
CB500/550 / Re: It’s home at last!
« on: November 12, 2023, 09:34:06 AM »
Timpsons can cut those keys. My branch had to order the blanks in but only took a couple of days.

42
CB350/400 / Re: Oil weep from head
« on: November 03, 2023, 12:23:18 PM »
http://www.sohc.co.uk/index.php/topic,28673.15.html

This is my post about the subject, it was for my 650 though.

I’m in the process of rebuilding my 550 at the moment so I’ll probably go for thicker o-rings again.

43
New Member Introductions / Re: Hi, Everyone!
« on: October 31, 2023, 08:06:00 PM »
Where abouts in Bucks?

I’m just by J5 M40, on the border with Oxfordshire.

44
Member 4 Sales / Re: 400/4 Cam Chain tensioner.
« on: October 29, 2023, 12:51:26 PM »
Thanks Bryan, I’ll check the condition of mine tomorrow.

45
Member 4 Sales / Re: 400/4 Cam Chain tensioner.
« on: October 29, 2023, 12:26:55 PM »
Are there alloy ones available for other models?

Just in the process of stripping down my 550, haven’t closely examined my tensioner yet but I know replacements from DS are £££.

Pages: 1 2 [3] 4 5 ... 38
SimplePortal 2.3.5 © 2008-2012, SimplePortal