Honda-SOHC
SOHC.co.uk Forums => CB350/400 => Topic started by: hondatri on September 04, 2018, 04:11:18 PM
-
Hi The old Fart is Having a Senior Moment. Is there a push rod going through Hole through lock nut. I dont see one in Parts listing.
-
Is it number 130 you mean? This is an adjuster bolt but not a push rod.
[attachimg=1]
-
No Iam just wondering if there is a push rod to operate clutch ( I am used to older bikes not familiar with the 400) I am just thinking that their should be a rod there before I fit springs and Plate. When I fit the new plates and tighten up and lock the castellated is there a push rod or does anything go through the hole.
-
No, the CB400/4 doesn't have a push rod. The CB500/4 has a full length push rod and the CB550 a very short stubby push rod.
-
Thanks for pointing me in right direction.Much appreciated
-
Clutch Sorted Thanks guys for Info