Post by: allankelly1 on November 12, 2021, 05:27:19 PM
Ok now dry fitted my original Dresda swing arm and with a bit of modifications got my caliper mount sorted even with a box section arm
(https://uploads.tapatalk-cdn.com/20211112/8494b4b2e65d5d233698ffdc33aeaca7.jpg)
(https://uploads.tapatalk-cdn.com/20211112/04b24da753f3e9fcec8e0c104de2d57e.jpg)
(https://uploads.tapatalk-cdn.com/20211112/0129af2b566cebfea0818909dcaccdc1.jpg)
Will need a couple of new parts but happy so far on how it has fitted
So as it’s just taking up space I have for sale a complete rear swing arm
The arm is in super condition and is already powder coated black
Will come complete with the following
Pivot bolt an nut
End dust caps
The arm itself
The inner pivot tube
Two wheel pulls that are in VGC with no rust
And most importantly the two wheel adjuster stops that are now as rare an hens teeth and just as expensive if you can find any
(https://uploads.tapatalk-cdn.com/20211113/93fc304fb3e0fe1e80c631075833ccb7.jpg)
(https://uploads.tapatalk-cdn.com/20211112/d50fd86590a0fc602d22cfbd63fa3c3b.jpg)
(https://uploads.tapatalk-cdn.com/20211112/7535a7dcdfdde26bf00bd7358b6cbf9c.jpg)
(https://uploads.tapatalk-cdn.com/20211112/be0c46a950d06a0a2f929a48bd97358b.jpg)
(https://uploads.tapatalk-cdn.com/20211112/bdf1dc9487d6c83005436b9472545121.jpg)
(https://uploads.tapatalk-cdn.com/20211112/565286db523585458a133c1e8ace6afc.jpg)
Going to chance my arm so asking for£70 plus £10 to post as the Dresda unit was not cheap
Idea for anybody building up a collection of parts
Any questions just pm me
Best wishes Al
Sent from my iPhone using Tapatalk
Post by: wildtapholer on November 18, 2021, 11:46:40 AM
Post by: allankelly1 on November 18, 2021, 11:52:25 AM
Good spot
Now at 70 but I would accept a sensible offer due to it being complete and in tip top condition
Best wishes Al
Sent from my iPhone using Tapatalk
Post by: allankelly1 on November 20, 2021, 05:56:49 PM
Best wishes Al
Sent from my iPhone using Tapatalk