Honda-SOHC
SOHC.co.uk Forums => CB500/550 => Topic started by: RBoss on November 27, 2021, 10:44:11 AM
-
Hi all,
I am in the middle of taking my bottom end apart to replace my primary chain + rubbers. Going smooth (so far), making notes and labeling parts, but (i think) after flipping the bottom end over to loosen the bottom case bolts I found something lying on my workbench. I couldn't find where the fiddly part comes from and the manual didn't mention it.
Is it some kind of oil jet?
The situation:
[attachimg=1]
The part:
[attachimg=3][attachimg=4][attachimg=2]
Anyone who recognises it?
Cheers,
Ruben
-
Goes between crankcase and barrells, should be two, one ate each side and only fit one way up. Make sure they are clean.
NO silicone gasket goo anywhere
-
https://www.cmsnl.com/honda-cb550f2-super-sport-550-four-1977-france_model17123/partslist/E03.html
12238323000 NUMBER 3
-
Goes between crankcase and barrells, should be two, one ate each side and only fit one way up. Make sure they are clean.
NO silicone gasket goo anywhere
Thanks! After pulling the primary shaft out the other one fell out as well ;D. All clear, thanks for the help!
-
No problem, i know most of the parts on the 500/550