Honda-SOHC
SOHC.co.uk Forums => Other Bikes => Topic started by: mac64 on March 12, 2024, 02:37:06 PM
-
Hi,
My CL350 needs carbs refurbished or replaced.
All the kits seem to be Chinese and David Silver only has a few genuine parts.
Any advice on where to buy genuine spares (rare I know) or where to get refurb done.
Thanks.
Mark.
-
Unless its been buggered about with all the brass bits should be fine with a clean
-
Agree with Bryan .. if original Keihin brass-ware then re-use if possible.
Also check your carb rubber diaphragms for splits.
Also check the little rubber bung that blocks one of the ports ... they sometimes go really hard.
-
In addition to the above do yourself a huge favour and invest in a 2ltr ultrasonic cleaner and some carb cleaning fluid from Allendale products. A 2 litre cleaner is big enough for a single carb.
-
Welcome Mark. Let us know which year CL350 you have & post a photo if you can. Welcome to the forum. James
-
CL360, nice bike. Welcome Mark. Jan