This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Messages - Popstar
1
« on: December 01, 2021, 06:49:25 PM »
Thank you.
2
« on: November 29, 2021, 07:06:23 PM »
Thanks,this one is a US import,and yes that’s some difference in production numbers, it’s no wonder they conquered the world.i wonder what month production started.
3
« on: November 29, 2021, 05:03:53 PM »
The plate on the headstock of my bike has 6/71 on it does that make it a KO or K1 ?
4
« on: November 21, 2021, 02:09:50 PM »
Thanks
5
« on: November 21, 2021, 01:08:14 PM »
When reassembling the front end is it quicker to put the mudguard in first or the wheel in first ?
6
« on: November 11, 2021, 08:49:48 PM »
Does any forum member have a front black disc shroud for sale.thanks in advance. .
7
« on: November 07, 2021, 07:34:46 PM »
The bike is a former US import,I have read were they liked to put stronger springs in clutches in the states so that could account for the extra spring length, are the plate quantities correct metal/fibre?
8
« on: November 07, 2021, 06:05:02 PM »
Ball bearing is correct size yes.
9
« on: November 07, 2021, 05:30:45 PM »
The rod appears to be OK in terms of damage however I am not sure of the length (see photo) .
10
« on: November 07, 2021, 05:25:43 PM »
Would forum members please be good enough to checkout to photos I have attached to this thread. I am interested in service limits and plate quantities, I have purchased a new clutch cable as the one fitted took two hands to pull in,however when I inspected it no snagging was evident, does this early model have a paticular issue with the clutch?
11
« on: November 04, 2021, 07:34:12 PM »
I did mine last week using a mixture of apple cider vinegar and white vinegar I only mixed the two types because I’d run low on one of them ,they both had a acid rating of 5% , I emptied(after 4 days) the tank and swilled it out with broken car glass and distilled water, put the hairdryer in the neck of the tank, when dried coated in a thick 2 stroke oil lightly thinned out with petrol. Great final result.
12
« on: November 01, 2021, 01:56:56 PM »
Ok I will attempt to turn the large external adjuster screw later in appears to be seized up. Incidentally what diameter should the ball bearing be?
13
« on: November 01, 2021, 01:34:48 PM »
You are probably right but the collar dropped out when I started degreasing the mechanism.
14
« on: November 01, 2021, 01:01:23 PM »
I've discovered why the clutch isn't working on my project bike 1 the cable looks like it's been under artillery fire, 2 a small collar is missing where(see photo) the ball bearing sit's. I will have to see if Silvers have a pair. There is a rim on the outer edge which would be difficult to match.
15
« on: October 31, 2021, 02:10:28 PM »
They (points) came already fitted to the bike some I assumed they were standard points.
|
Show Posts