Honda-SOHC
SOHC.co.uk Forums => CB500/550 => Topic started by: Niko on March 29, 2017, 11:07:54 PM
-
Hi....had the bike running tonight. When it's running it drips oil from the stator cover.
Wiped it off and it all seams dry inside.
I read somewhere about an oil seal / oil gallery in that area....?
Can someone help me out with where it's located please?
Cheers
Sent from my iPad using Tapatalk
-
I have seen the plug fitted backwards berfore, the small pip faces outwards
-
Thank you both very much...will check tonight
Sent from my SM-G935F using Tapatalk
-
Niko,
If it is like the 400/4 DON'T start it with the cover OFF.
You will end up with oil all over the floor. (I made the mistake thinking it would be easy to clean the rotor :'()
-
I second that and don't even kick it over with the cover off!!
-
Ok....cheers
Sent from my SM-G935F using Tapatalk
-
Has the bike been stood for a while - I had a similar leak with a usa inport engine, decided as I needed the bike for work to ignore the leak and just keep the oil topped up until I had time to fix it, after a week of the 40 mile round trip to work the leak was gone and oil level stayed right between changes.
-
I know a guy who had a minor crankcase oil leak. He didn't fix it as such; he bodged up a bit of tubing to direct the oil over his drive chain. "cheaper than buying a Scottoiler" he said.
-
Fixed...turns out it was weeping from the cam chain tensioner bolt and running along the barrel case....dripping off the stator.
Sent from my SM-G935F using Tapatalk
-
New o ring and sealing washer required
-
New o ring and sealing washer required
Cheers
Sent from my SM-G935F using Tapatalk