This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Messages - Bryanj
16
« on: May 04, 2024, 10:49:26 PM »
All head gaskets are now thicker than Honda original due to no asbestos used in manufacture but the suppliers still give you the original size O rings so they dont seal as well. If you go to the US site and look up Mark Paris (Hondaman) he can sdvise on size, i dont have all my books to hand
17
« on: May 04, 2024, 08:55:55 PM »
550 and 500 same shape but later ones had a connector bit, the screwed in retainer does not have a seal, only the big tim pressed plate
18
« on: May 04, 2024, 08:54:08 PM »
If the people who made it, or those that sold it didnt give you a wiring diagram in my opinion it aint worth using
19
« on: May 04, 2024, 07:05:59 PM »
No matter what set you need thicker O rings at the headgasket than those in the set
20
« on: May 03, 2024, 05:18:45 PM »
Its what happens on that half day in August when nobody is looking
21
« on: May 03, 2024, 02:05:01 PM »
Can normally tyrn by hand WITH pistons fitted
22
« on: May 02, 2024, 10:18:51 PM »
There you go, told you it would be ok!
23
« on: May 02, 2024, 08:05:44 PM »
Dave, its only the later ones with a rubber seal, early ones the seal is the felt ring, i think i still used the caps with the bronze bushings though
24
« on: May 02, 2024, 08:04:05 PM »
Only thing i can think off is either something between case and shell or the disaster of a bent crank, i have built engines with all black shells with no rotational problems
25
« on: May 02, 2024, 08:01:17 PM »
But no hallway ornaments!
26
« on: May 02, 2024, 01:22:38 PM »
You didnt oil the back of the shell did you?
27
« on: May 01, 2024, 06:45:48 PM »
Sold or pulled
28
« on: May 01, 2024, 05:08:56 PM »
Usually you find the collar more worn than the bushes, the early one is still available, but bloody expensive, the later one is not available but you can use the early one, preferably with the bolt having a grease nipple at each end rather than the one in middle of swing arm
29
« on: May 01, 2024, 05:03:57 PM »
It only says new stainless exhaust NOT original
30
« on: May 01, 2024, 05:00:43 PM »
Boyer fire all the plugs all the time
|