Honda-SOHC

SOHC.co.uk Forums => CB500/550 => Topic started by: deltarider on September 13, 2018, 12:39:00 PM

Title: Driver plus, meaning JIS or ordinary Phillips?
Post by: deltarider on September 13, 2018, 12:39:00 PM

The crosshead screwdrivers in the Honda toolbag are described: DRIVER, PLUS, #2 and DRIVER, PLUS, #3. Are both 2 and 3 ment to be JIS or Phillips? And do 2 and 3 mean 2 and 3 mm?

Title: Re: Driver plus, meaning JIS or ordinary Phillips?
Post by: mike the bike on September 13, 2018, 01:47:16 PM

They would be JIS.  #2 and #3 are equivalent to PH2 and PH3; Phillips sizes.

Title: Re: Driver plus, meaning JIS or ordinary Phillips?
Post by: deltarider on September 13, 2018, 02:55:35 PM

Thanks Mike. I'd better straighten that old driver then and not bin it. I suppose 2 and 3 mean mm.

Title: Re: Driver plus, meaning JIS or ordinary Phillips?
Post by: Moorey on September 13, 2018, 03:39:45 PM

I got these a while ago and seem good for the price. I haven't had one screw cam out since. From Ebay £20

Werkzeug JIS Screwdriver Set
No2 x 38 mm long,
◦No1 x 75 mm long,
◦No2 x 100 mm long, 
◦No3 x 150 mm long