Honda-SOHC
SOHC.co.uk Forums => CB500/550 => Topic started by: paulbaker1954 on January 25, 2016, 04:21:36 PM
-
My project bike has a key that fits ignition and seat lock. Should it be the same key for the steering lock or was this always a different key?
I am hoping it's the same key and that my steering lock is just a bit rusted/gummed with crud (I didn't want to try and force anything in case I break the only key I have !!)
Thanks all
-
Very good question ;D It should be the same key and the key number can be found on the face of the barrel. These are a pig of a steering lock so, may have been changed.
-
On both, the '72 and the '76 500/4's I found one key for ignition and seat, and a different, smaller key for the steering lock.
For the refurb I now ordered a complete lock-set, with one key fitting all 3 barrels.
-
The number should be visible on all the lock faces so you should be able to check