Honda-SOHC
SOHC.co.uk Forums => CB500/550 => Topic started by: Dave M on September 05, 2007, 09:36:49 PM
-
Hi again.
Does anybody know if the rear wheel on a CB550K3 is the same as the one on a CB550F2?
I've checked some parts lists for the K1 and the rim and hub part numbers are the same so I was wondering if the K3 was the same as well as I may have located a wheel.
Thanks,
Dave
-
You could probably get a quick answer from Bryan Jones. I don't know whether he's a member on here but his email is: blj AT blj.org.uk (just take out the spaces and use an "@")
-
Thanks Steve.
-
Well the rear wheel I thought I'd found was no good so has anyone got a wheel from an F2 or perhaps a K3 sitting gathering dust in the corner of their workshop?
Anyone...
-
Well the rear wheel I thought I'd found was no good so has anyone got a wheel from an F2 or perhaps a K3 sitting gathering dust in the corner of their workshop?
Anyone...
Hi Dave,i just might be able to help you with that rear wheel,i did have a few but i have sold a few off of late,i'll have a look and see if i've got one left
Perry
-
My wheel is now ready and I'm picking it up tomorrow.
Despite only having 2 hands I've managed to fit my new Marshall Deepthroat system but my exhaust gaskets are stuck in the post.
Thanks guys!