Honda-SOHC
SOHC.co.uk Forums => CB750 => Topic started by: Phil9886 on June 24, 2023, 05:45:40 PM
-
Hi. I've seen a couple of different dimensions listed for CB750 float heights (maybe because they are different for different models). Can anyone let me know the correct height for the CB750K6? I will be measuring from the small ridge inside the channel for the bowl gasket to the top of the float just as the needle valve closes - correct? While I'm here - is 2 turns out for the air screw a good place to start? Many thanks. Phil
P
-
Hi. I've seen a couple of different dimensions listed for CB750 float heights (maybe because they are different for different models). Can anyone let me know the correct height for the CB750K6? I will be measuring from the small ridge inside the channel for the bowl gasket to the top of the float just as the needle valve closes - correct? While I'm here - is 2 turns out for the air screw a good place to start? Many thanks. Phil
P
26mm from the lower part of the ridge, with the carbs standing up and start with one turn out ;)