Honda-SOHC
SOHC.co.uk Forums => CB750 => Topic started by: tonywright on January 23, 2024, 01:17:51 PM
-
I'm rebuilding a CB750 K3 engine and have purchased ne con rod bolt part number 13213-333-003 these supersede the originals which are no longer available. Does anybody know the torque setting for these ? Thanks, Tony.
-
Reading through the service manual (Ash's dropbox) i come across the value of 14.5 ft-lbs
-
Reading through the service manual (Ash's dropbox) i come across the value of 14.5 ft-lbs
Similar to the 500 conrod nuts then at 14.5-15.9 ft-lbs.