Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Topics - fisjon

Pages: [1]

CB350/400 / pistons and liners on ebay

« on: July 01, 2014, 03:42:01 PM »

I have a set of pistons and liners on ebay.
.75 oversize and done a handful of miles only.

http://www.ebay.co.uk/itm/161354162372?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1555.l2649

CB350/400 / 400 cam chain guides

« on: March 14, 2014, 07:47:23 PM »

New 400/4 cam chain guides available here

http://www.ebay.co.uk/itm/New-Replica-Cam-Chain-Guide-14620-333-000-Honda-CB350F-CB400F-Super-Sport-/181333695121?pt=Motorcycles_Parts_Accessories&hash=item2a38549a91

Recommended Sources for Parts and Services / Carb Balancing

« on: April 12, 2013, 12:02:09 PM »

Hi,
Anyone in the South Wales area needing their carbs balancing?
I have a CarbPro 4 feed guage and some knowledge to go with it.
I will balance any of the SOHC fours for £15!! (I am retired and get bored with nowt to do).
I also have a very powerful strobe so I can set your ignition up too.
So how about £20 for the both!

Send me a pm and I'll get back to you.
PS I live in Caerphilly.

Cheer
John

CB650 / Easy fix carb problem!

« on: August 10, 2011, 07:33:33 PM »

Just thought I would share a problem that I had with the cb650Z.

It was running a little erratic and after rolling off the throttle it would take a few seconds to power up. I thought it was definately a carb problem so I stripped (total strip down) down a spare set and dunked them in maraine clean, used an air hose to blow out any s--t, put in new seals etc, I even went anal and zinc plated all the exterior fitting. They really looked brill. Put them on and the same prob occured.

B-ll-c-s I thought.

Well it turned out that I had unwittingly fitted resitor plugs and resistor caps which is fine on new bikes but not so clever on an old bike with 30 years of wear and tear on it. I changed the plugs to bog standard D8EA and fitted new resitor caps. What a difference! All 'carb' problems solved.

Something to consider before a full strip!

john

New Member Introductions / Been across the pond!!!

« on: July 13, 2011, 09:06:55 PM »

Hi guys,
Iv'e been faffing around for 6 months on the usa site not realising that we have our own show over here.
I live in Caerphilly, just north of Cardiff. I have just finished restoring a CB650Z and I have some spares left over as I had three cb650z's at one time and a box of bits.
look forward to communication with you all
cheers
John