This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Messages - Safo
1
« on: August 09, 2020, 11:20:00 PM »
I attached a syringe to the bleed nipple on the caliper and sucked the fluid down whilst pumping the leaver, once fluid was in the system I just bled as normal, must add that was a 500 m/cyl
2
« on: August 09, 2020, 09:20:28 PM »
Those were the days, I used to start my mobylette by striking the magneto with my foot
3
« on: July 27, 2020, 11:09:33 PM »
Nice finish on the forks and mudguards, looks great, hope all goes well
4
« on: July 23, 2020, 01:22:22 PM »
Thought price was way over, but there's a mint one on there for 12.5k
5
« on: July 22, 2020, 12:45:20 PM »
Re ride again project, here we are at Retford before heading home
6
« on: July 20, 2020, 03:40:40 PM »
Thanks K2-K6, this forum has been a great resource for info, advice and help, and will continue to in the future i am sure
7
« on: July 20, 2020, 01:53:33 PM »
Hi all, project now finished at last, she's being ridden again, here is a pic after yesterday's second test ride, all seems OK even the front brake gave a little hint of a sqweal, time to hand the keys to someone who is looking fwd to a ride out, will post more pics
8
« on: June 26, 2020, 09:19:45 PM »
Have a look at his other items for sale
9
« on: June 26, 2020, 06:03:55 PM »
Thanks, me eyes are painted on tday
10
« on: June 26, 2020, 04:54:03 PM »
Thanks bryanj, I was hoping to make my own if I can get the measurements, just cannot get a clear measure now exhausts are on,i want to take it out on a shakedown test today
11
« on: June 26, 2020, 04:26:26 PM »
Don't know what diameter it is either Bryanj , it's the one that is inboard of the right footrest,
12
« on: June 26, 2020, 03:36:42 PM »
Hi can anyone tell me the width of rear lower eng bolt spacer, need to make one as its nowhere to be found,installed eng some time ago and hoped I would come across it, wondering if it was missing in the first place.
13
« on: May 18, 2020, 04:54:17 PM »
Thanks, guys I would say the only thing wrong was the main jet o rings, so I will use the keyster ones, and the keyster float valves, as i accidentally mixed up the ones I removed, I will learn one day to research more before buying, got me fingers burnt with the pattern intake rubbers
14
« on: May 18, 2020, 01:04:07 PM »
Hi all, just rebuilding the wife's 500 carbs after sonic clean, 4x keyster kits, in a dilemma already, needles removed are stamped 272304 and clips on no. 4 grove, no identity on the tubes, keyster needles stamped D 26 is this just keysters no. and they are the same or are they two different needles, I've fitted one with the clip on the middle groove as is usually the norm but decided to ask for comments before going further Thanks in advance
15
« on: May 13, 2020, 11:27:27 AM »
Made these the other day, hope to be trying them out in a week or so
|