Honda-SOHC

SOHC.co.uk Forums => CB750 => Topic started by: billy192 on August 18, 2012, 09:23:02 PM

Title: centrer rod in forks
Post by: billy192 on August 18, 2012, 09:23:02 PM: Hi,
just striped forks and found they are not like the book any ideas? still changed oil 220cc of 30w they feel great but what forks are these?

(http://i1209.photobucket.com/albums/cc393/njwill1/IMG_6398.jpg)

forks with a rod in the middle

(http://i1209.photobucket.com/albums/cc393/njwill1/IMG_6397.jpg)

Billy
Title: Re: centrer rod in forks
Post by: Bryanj on August 19, 2012, 06:07:05 PM: 450 twin or early 500 four mate
Title: Re: centrer rod in forks
Post by: billy192 on August 20, 2012, 06:44:27 AM: Thanks Bryan,
have a look at item 261069156805 on flea bay. are they the correct ones?
Title: Re: centrer rod in forks
Post by: Bryanj on August 20, 2012, 08:58:41 PM: As they have finished i don't know mate, also can't remember what bike/model you got!
Title: Re: centrer rod in forks
Post by: billy192 on August 21, 2012, 07:01:35 AM: Bryan,

I have a K6 they are off a K4/K5 the Guy said it was a 1975 K4. I got them in the end so if they don't fit i will have to sell them. as for the ones I have if I sell them how can i find out what bike they are of so as not to misled people. can i download a manual for a 450 twin and 500 four?
thanks for all your help.

Billy
Title: Re: centrer rod in forks
Post by: mick on August 21, 2012, 02:02:13 PM: Billy you could look on here to see if it helps you identify your forks,

www.cmsnl.com
Title: Re: centrer rod in forks
Post by: LesterPiglet on August 21, 2012, 03:01:05 PM: My 550 forks have a centre rod.
Title: Re: centrer rod in forks
Post by: Bryanj on August 21, 2012, 04:20:05 PM: That makes them not 550 Lester, but the 550 sliders will fit.

If the caliper mountings are K6 then the sliders are early 500 four as the 450 had the caliper braket same as early 750. Fork tubes should be slightly shorter than 750
Title: Re: centrer rod in forks
Post by: billy192 on August 21, 2012, 05:56:39 PM: Thanks Mick, that site is great. the forks I have are off a CB500K1 would that be 1971?

I will be selling them as soon as I have the new ones serviced.
Thanks Guys
Billy
Title: Re: centrer rod in forks
Post by: LesterPiglet on August 21, 2012, 09:34:41 PM: Quote from: Bryanj on August 21, 2012, 04:20:05 PM
That makes them not 550 Lester, but the 550 sliders will fit.

If the caliper mountings are K6 then the sliders are early 500 four as the 450 had the caliper braket same as early 750. Fork tubes should be slightly shorter than 750
I wondered why I need to mess with fluid levels. I put in the exact amount stated in the manual and it's behaving like the forks are empty.
Title: Re: centrer rod in forks
Post by: Bryanj on August 22, 2012, 12:53:48 AM: Billy, let me know about the forks as I may buy them off you and if its me don't bother to reassemble
Title: Re: centrer rod in forks
Post by: billy192 on August 22, 2012, 11:06:33 AM: yes ok but I have rebuilt and they are back on the bike, they work great but they are not the correct ones for this model, as is many other things lol.
when I have the new ones i will give you a shout.
\Billy
Title: Re: centrer rod in forks
Post by: billy192 on August 24, 2012, 05:08:59 PM: Bryan,
forks came today triple clamp broken and also stanchion with v big area of damage looks like a front ender. sent them back
will keep looking

Billy