Honda-SOHC
Other Stuff => Misc / Open => Topic started by: bomber on January 05, 2014, 10:21:42 PM
-
Hello,
My Honda is first proper bike I'm working on my self, I do have a bunch of tools but all a rather cheap crappy ones, good for rounding nuts rather then undoing them...
Time to tool up! on a budget... :'(
I keep reading about Halfords Advanced Pro any cons ?
Many thanks
-
Hi Bomber buy the best you can afford, you don't have to get mega expensive tools to get decent ones, probably a decent socket set, and a screwdriver set to begin with ;), others will be along soon to add there ideas cheers ;) Mick.
-
Mick, don't forget a big hammer :).
-
Inpact driver, spend about £10. Socket set, I have a sealey pro set at a good promotional price, they'll even get rounded cylinder head nuts undone and have a duo metric set so the inperial sizes are covered - I didn't intend to play with old brit iron when I bought my set but it has since proved usefull. 3/8 drive for a honda. Don't buy cheap torque wrenches, My draper will happily snap or strip every 6mm bolt it is used on without going click once.
-
Why don't Draper torque bars ever go click? Some family member got me one for my birthday, didn't have the heart to tell them the truth. So its sat in the bottom of my tool box for the last 11 year's.
-
Hi Bomber
I served my time as an engineer and worked in aero industry with all the top make tools. I bought some Halfords Pro range several years ago and rate them - think they've got lifetime guarantee too
Phil
-
a 6 inch long spanner size 10mm and a spring balance is a cheap but effective alternative to spending out £££ on a torque wrench. by the time you are up to 8mm bolt diameter (m12 or 13 spanners) then a draper torque wrench is ok. to be honest I tend to go by feel on everything appart from cylinder heads now and spend a lot less time with the helicoil kit as a result, or mopping up oil spills for that matter. I learnt a lot doing up some really and truly knackered engines on the cheap, got quite good milages out of warmed over scrap metal by mixing and matching the least knackered bits. It's one way to learn. Cheap transport is how I got into the sohc fours, funny to see them regarded as classics now -it may be how I saw them in some ways but in others I think prices are a bit silly as a result.
-
Halfords torque wrench ( the smaller one you will need) was tested with many others in Classic Mechanics magazine, and rated the Halfords one the best, I certainly rate it and it's essential equipment for rebuilding
-
I was wondering lads. Can a Halfords torque wrench be calibrated? Can't find it listed by any firms that offer a calibration service.
-
Any torque wrench can be callibrated but some are a lot easier to do than others