This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Topics - RGP750
1
« on: May 10, 2023, 03:11:55 PM »
Hi All I have a problem with my 72 500/4.Went out on it last year and everything perfect. This year turn on ignition and dead short somewhere, frustrating nightmare. Gradually disconnected areas of wiring, handlebar switches, rear light, horn regulator, etc and finally every connector in the headlight. Thought it could be solenoid so replaced that, bypassed ignition switch , still doing it . any thoughts pleeeeeeeese! Rich
2
« on: April 21, 2023, 07:23:00 PM »
Hi all Not been here for a while. Just restoring a 1971 125k3 twin , apparently only 27 imported into the UK. I need a 6v horn for it . It's the same as a cd 175 . As long as it honks condition doesn't matter as I have a 12v nos to swop insides with Thanks Rich
3
« on: October 02, 2022, 05:52:44 PM »
Hi All Not been on here for a while. Fed up with carbs clogging up through lack of use. Do you winter store with carbs and tank empty or just carbs Cheers Rich
4
« on: August 08, 2021, 09:59:21 AM »
My first 500 back in 1974 has just appeared on DVLA I don't suppose anyone on here is the owner Gold JKJ12L Rich
5
« on: June 25, 2021, 07:18:35 PM »
Hi All Got the 750 out today and the oil warning light won't come on when the ignition is on . Help please you electronic wizards. Bulb ok and when I earth the oil switch terminal the light comes on ,has the switch had it or is there an easy fix . Thanks Rich
6
« on: April 28, 2021, 04:41:18 PM »
Hi All I'm after an eBay purchase from France ,but they won't send to the UK Are there any members in France that could help me with this please Thanks Rich
7
« on: September 13, 2020, 05:20:52 PM »
Had the first longish ride since the rest . I really do know why I love the 500, said that back in 1973 [ Guests cannot view attachments ]
8
« on: July 26, 2020, 08:05:32 PM »
I now know who I loved the 500 back in 1973 ,first ride on this one , taken about 18 months, [ Guests cannot view attachments ] [ Guests cannot view attachments ] and loved it. The 69 750 I like but this I love. It will be staying. Thanks for selling it to me Steve
9
« on: July 12, 2020, 04:09:38 PM »
hi all Thought I had finished the re build but forks stuck in compressed mode,. Never rode the bike before stripping it down but did note no oil in the left fork when I stripped them . Anyway looks like I have found the problem, there is a small crack at the calliper arm 6mm bolt?? anyone have a half decent left hand lower for sale pleeeeeeese!! thanks Rich
10
« on: July 03, 2020, 06:20:53 PM »
Finally got the 500 pretty much finished. I bought Silvers electronic ignition as had a lot of good reports. The instructions are not brilliant but following as well as I can I can't get it to do what it is supposed to do . Am I correct the light should NOTbe on when you line up the 1/4 timing market should only come on when you rotate the back plate anti clockwise? Mine is on and doesen't go off unless you turn the crank
11
« on: June 29, 2020, 08:06:22 AM »
Bit of a long shot I know. Virtually finished the rebuild and hadn't realised the no 2 exhaust is shot , other 3 are new replacements I think and are totally solid .. I don't suppose anyone out there has a pretty good one for sale pleeeeese. Repro set ,double skin header in Italy for sale, anyone had experience of these? Thanks Richard
12
« on: June 05, 2020, 07:31:44 PM »
Hi strangers not been here for a while . Almost have the gold 500 back on the road (yours Steve) carbs totally stripped and ultrasonically cleaned put back together with new float jets and housings. and seals floats set at 22mm bench tested for leaks and two ctr overflowing . Tried just tapping float bowls ,still leaking . Took bowels off and result one of the overflow tubes is leaking . all floats are free. Change for another float bowl now they are all overflowing Grrrrrr! any thoughts please
13
« on: July 22, 2019, 07:19:44 PM »
Well got there at last Finally got the first one done . Steve can you PM your address please and I'll send it for your appraisal . There is a fair bit of tooling to make these so I would like £25each inc postage. Anyone interested please PM Thanks Rich [ Guests cannot view attachments ]
15
« on: May 21, 2019, 06:26:16 PM »
Hi All Finally totally finished the 175 with loads of NOS parts including Carbs. Problem, is starts and runs nicely on tick over on choke ,turn off choke and the engine splutters and pops and dies when throttle is opened HELP!!! checked all jets ,fuel supply and played with carb settings all to no avail. Met Kettle (Mick on here at a jumble on Sunday and he suggested adv and ret, checked and seems ok) I'm stuck Rich
|